• Unit 3/13 Frost Rd,
  • Campbelltown NSW 2560

Products-loop

HOME / Products-loop

featured_image

Python Hopper Sleeve Safety Cover – Line Pump

Python Back Hopper Sleeve Safety Cover for Concrete Line Pumps Click on video link below to see this in operation

Add to cart
featured_image

Gumboots – Steel Cap – Blundstone

Blundstone Yellow Tag Gumboots with Steel Cap Available in Sizes 9-13

Add to cart
featured_image

Concrete Pump Safety Sign

Measures 21cm x 60cm x 30cm

Add to cart
featured_image

Retractable Safety Knife

Product Code: SA-RK-1

Hard wearing metal body offering self-retracting mechanism for extra safe handling.
Includes one blade

Add to cart
featured_image

Foam Earplugs -Corded

Features and Benefits: Box of 100 – Disposable PU Smooth foam earplugs Class 5 rating (SCL80=27) Highest Class rating under AS/NZS 1270:2002 Noise Reduction Rating: 32 decibels (when used as directed) Individually packaged Single use wear hygiene Low cost, ease of use and high level of comfort Typical Applications are: Construction & Demolition, Noisy workplaces, […]

Add to cart
featured_image

4″ Concrete Pump Accessory Starter Pack

Includes the following: 5pcs x Victaulic Snap Clamp 6pcs x Rubber Gasket 2pcs x Sponge Ball  

Add to cart
featured_image

3″ Concrete Pump Accessory Starter Pack

Includes the following: 4pcs x Victaulic Snap Clamp 5pcs x Rubber Gasket 2pcs x Sponge Ball Product Code: CPAP-3

Add to cart
featured_image

2″ Concrete Pump Accessory Starter Pack

Includes the following: 3pcs x Victaulic Snap Clamps 5pcs x Rubber Gaskets 2pcs x Sponge Balls

Add to cart
featured_image

Continental Air/Water Hose – No Fittings

Product Information APPLICATION: An economical air and water hose. For a wide range of industrial, construction and agricultural applications. CONSTRUCTION TUBE: Versigard® synthetic rubber, RMA Class C (Limited Oil Resistance) COVER: Yellow Versigard® synthetic rubber REINFORCEMENT: Spiral synthetic yarn, 2” is braided TEMPERATURE: -40°C to 88°C

Add to cart
featured_image

250psi Yellow Continental Air/Water Hose Assembly

Made in USA Comes with Crimped on Type A Fittings – Available in 19mm and 25mm I.D Custom Lengths available on request

Add to cart
featured_image

Allcrete Wire Hose Assemblies – 4″

Custom lengths available upon request Our 4” hoses are also available with a 4.5” Metric (Schwing) End to 4” Hose Tail. Please specify when ordering by adding -45 to any of the above PCS product codes. Example GYW-40-10D-45

Add to cart
featured_image

Allcrete Wire Hose Assemblies – 3.5″

Custom lengths available upon request Our 3.5” hoses are also available with the following fittings: 4” to 3.5” Non-Reducing Hose Tail. Please specify when ordering by adding a -NR to any of the above PCS product codes. Example GYW-35-10D-NR 4.5” Metric (Schwing) to 3.5” Reducing Hose Tail. Please specify when ordering by adding a -45 […]

Add to cart
featured_image

Allcrete Wire Hose Assemblies – 2.5″

Custom lengths available upon request Our 2.5” hoses are also available with a 3” to 2.5” Non-Reducing Hose Tail. Please specify when ordering by adding a -NR to any of the above PCS product codes. Example GYW-25-10D-NR

Add to cart
featured_image

Continental Allcrete Wire Hose only 2″ to 5″

Custom lengths available upon request Product Information APPLICATION: For handling wet concrete with high head pressures at the critical flex areas of a concrete boom truck and as a discharge hose on the delivery end of high-pressure concrete pumps. Exceeds ASME B30.27-2009. 2:1 WP to burst ratio CONSTRUCTION TUBE: Black TufsynR synthetic rubber COVER: Black […]

Add to cart
featured_image

Continental Allcrete Fabric Hose Assemblies-4″

Custom lengths available on request Our 4” hoses are also available with a 4.5” Metric (Schwing) End to 4” Hose Tail. Please specify when ordering by adding a -45 to any of the above PCS product codes. Example GA-40-10D-45

Add to cart
featured_image

Continental Allcrete Fabric Hose Assemblies-3.5″

Custom lengths available on request Our 3.5” hoses are also available with: 4” to 3.5” Non-Reducing Hose Tail. Please specify when ordering by adding a -NR to any of the above PCS product codes. Example GA-35-10D-NR 4.5” Metric (Schwing) to 3.5” Reducing Hose Tail. Please specify when ordering by adding a -45 to any of […]

Add to cart
featured_image

Continental Allcrete Fabric Hose Assemblies-2.5″

Custom Lengths available on request Our 2.5” hoses are also available with a 3” to 2.5” Non-Reducing Hose Tail. Please specify when ordering by adding a -NR to any of the above PCS product codes. Example GA-25-10D-NR

Add to cart
featured_image

Continental Allcrete Fabric Hose Assemblies-2″

Custom sizes available on request Our 2.5” hoses are also available with a 3” to 2.5” Non-Reducing Hose Tail. Please specify when ordering by adding a -NR to any of the above PCS product codes. Example GA-25-10D-NR

Add to cart
featured_image

Continental Allcrete Fabric Hose only 2″ to 4″

Custom lengths available upon request Product Information APPLICATION: For use in plaster & grout and shotcrete applications, handling a multitude of materials being pumped to concrete structures, dams, tunnel faces, swimming pools, etc. For use as a flexible connection between pumping equipment and hard piping. Exceeds ASME B30.27-2009. 2:1 WP to burst ratio CONSTRUCTION TUBE: […]

Add to cart
featured_image

Camlock Rubber Seals

Available in Packs of 5 pieces

Add to cart
featured_image

Type DP Aluminium Camlock

Male Camlock Adaptor x End Cap

Add to cart
featured_image

Type DC Aluminium camlock

Female Camlock Adaptor x End Cap

Add to cart
featured_image

Type F Aluminium Camlock

Male Camlock Adaptor x Male BSP Thread

Add to cart
featured_image

Type E Aluminium Camlock

Male Camlock Adaptor x Hose Tail Hose Tail can be secured inside the hose using our hose clamps (See Page 15)

Add to cart
featured_image

Type D Aluminium Camlock

Product Codes:

1″ CAM-D-1
1.5″ CAM-D-15
2″ CAM-D-2
3″ CAM-D-3
4″ CAM-D-4

Add to cart
featured_image

Type C Aluminium Camlock

Female Camlock Adaptor x Hose Tail Hose tail can be secured inside the hose using our hose clamps (See Page 15)

Add to cart
featured_image

Type B Aluminium Camlock

Female Camlock Adaptor x Male BSP Thread

Add to cart
featured_image

Type A Aluminium Camlock

Male Camlock Adaptor x Female BSP Thread

Add to cart
featured_image

Bauer Fitting Rubber Seal

Product Codes:

4″ BA-4-SEAL
6″ BA-6-SEAL

Add to cart
featured_image

Male Bauer x Male BSP Thread

Product Codes:

4″ BA-MB-4
6″ BA-MB-6

Add to cart
featured_image

Female Bauer x Male BSP Thread

Product Codes:

4″ BA-FB-4
6″ BA-FB-6

Add to cart
featured_image

Male Bauer x Weld on Flange

Product Codes:

4″ BA-MF-4
6″ BA-MF-6

Add to cart
featured_image

Female Bauer x Weld on Flange

Product Codes:

4″ BA-FF-4
6″ BA-FF-6

Add to cart
featured_image

Male Bauer Lever

Product Codes:

3″ BA-ML-3
4″ BA-ML-4
6″ BA-ML-6

Add to cart
featured_image

Male Bauer to Tail

Product Codes:

3″ BA-MT-3
4″ BA-MT-4
6″ BA-MT-6

Add to cart
featured_image

Female Bauer to Tail

Product Codes:

3″ BA-FT-3
4″ BA-FT-4
6″ BA-FT-6

Add to cart
featured_image

Cage Splicing U-Bolts – Black Steel Finish

See details for Product Codes for each available size Test Certificate available on request

Add to cart
featured_image

Galvanised Finish

Tested to Australian Standard AS 4100-1998 Please see below for product codes

Add to cart
featured_image

Blow Out Cap with Stainless Steel Fittings – Two Stage

Two Stage Blow Out Cap – 3″ and 4″ Victaulic End Blow out Cap with 19mm Air/Water Fitting – Stainless steel nipples and t-piece – Brass ball valve – Great for blowing out certain sections of your line  

Add to cart
featured_image

High Pressure Putzmeister Female Blow Out Cap 6″ – XL

Female PM (Z Type) Blow Out Cap with 19mm Type A fitting and 38mm Release Valve

Add to cart
featured_image

PM(ZX) Blow Out Canon 6″

6″ Female PM blow out cannon with 38mm release valve, 19mm water fitting, pressure gauge and handle

Add to cart
featured_image

Concrete Remover

Con-Clean Concrete Remover – Dry lubricant derived from Molybdenum disulphide allowing for application in high temperatures – Safely remove concrete/cement from trucks and tools. Apply with broom or spray. Allow up to 20minutes dwell time. Remove concrete with pressure washer – Safely removes concrete/cement from aluminium windows and glass. E.g. Industrial Clean ups. Will not […]

Add to cart
featured_image

Victaulic Blow Out Canon with Fittings

Great when using a square/cylinder sponge, water then a sponge ball to blow out 2 sizes in stock Other sizes can be made on request

Add to cart
featured_image

High Pressure Putzmeister Female Blow Out Cap 6″

Female PM Blow Out Cap with 19mm Air/Water Fittings-Stainless Steel Also available in XL with a 38mm release valve.

Add to cart
featured_image

Victaulic Blow Out Cap – Single

Available in various sizes Also available with Butterfly Handle – BH added to product code.

Add to cart
featured_image

Blow Out Cap with Stainless Steel Fittings – Two Stage

Two Stage Victaulic Blow Out Cap – Victaulic End Blow out Cap with 19mm Air/Water Fitting – Stainless steel nipples and t-piece – Brass ball valve – Great for blowing out certain sections of your line Also available with Butterfly Handle – BH added to product code

Add to cart
featured_image

Blow Out Cap with Stainless Steel Fittings – Three Stage

Three Stage Blow Out Cap – 2″/3″/4″ Victaulic End Blow out Cap with 19mm Air/Water Fitting – Stainless steel nipples and t-piece – Brass ball valve – Great for blowing out certain sections of your line Also available with Butterfly Handle: Add -BH to our Product code. Eg: BOC-432-BH

Add to cart
featured_image

Budget Sponge Balls – Hard

Great for line hands who always lose sponge balls

Add to cart
featured_image

Budget Sponge Balls – Medium

Great for line hands who always lose sponge balls

Add to cart
featured_image

Budget Sponge Balls – Soft

Orange Sponge balls – great for line hands who always lose sponge balls !

Add to cart
featured_image

Medium/Hard Sponges

Available in various sizes and packs Different sizes can be made to order. Minimum quantities apply.

Add to cart
featured_image

Soft/Medium Rectangle Sponges

180 x 180 x 180mm For Pipe/Hose I.D. 5″/6″ Pack of 30 pieces Different sizes can be made to order. Minimum quantities apply.

Add to cart
featured_image

Medium/Hard Square White Sponges

Available in 2 sizes in packs of 50

Add to cart
featured_image

Soft Cylinder Yellow Sponges

Great alternative to standard foam sponges can be hidden away in the truck for emergencies Available in 2 sizes in packs of 50

Add to cart
featured_image

Soft Square Yellow Sponges

Vacuum packed sponges Great alternative to standard foam sponges Can be hidden away in the truck for emergencies 2 Sizes available in boxes of 50

Add to cart
featured_image

Bulka Bags – 1 Tonne

90 x 90 x 90cm Safe Working Load: 1000kgs Safety Factor: 5:1 Single use bag with 4 cross corner loops

Add to cart
featured_image

Sponge Ball Catcher

Various sizes available

Add to cart
featured_image

Crete Off Ready to Use Concrete Remover

Crete Off concrete dissolver works by attacking and dissolving the “glue” or Portland in concrete. It deconstructs the bond netween the Portland and the other ingredients such as sand or gravel. It turns the material into a soft mush which does not require hazardous waste disposal. Great replacement product for acid and is not classified […]

Add to cart
featured_image

Super Tech Concentrated Truck Wash

Designed to clean painted surfaces without agitation 1L of concentrated liquid will make 10L of truck wash

Add to cart
featured_image

True Grit Hand Cleaner

Heavy duty hand cleaner for industrial use, designed to remove the toughest industrial soils from hands without stripping natural oils from the skin. It contains natural citrus extracts and fine polyethylene beads to remove grease, oil, grime and most paints and inks For best results, apply to dry hands, massage in and then rinse with […]

Add to cart
featured_image

Clear PVC Water Suction Hose with Wire Braid – Hose only

Product Information APPLICATION: A versatile clear suction hose used in the conveyance of a wide range of food and beverage materials. The non-toxic formulation conforms with FDA requirements. CONSTRUCTION TUBE: Clear PVC COVER: Clear PVC REINFORCEMENT: Spring Wire TEMPERATURE: -7°C to 66°C

Add to cart
featured_image

Shut Off Valve – Hand Operated

Available in 4″ (102mm) and 5″ (127mm)   Concrete Hand Operated Hydraulic Shut Off Bullet Valve with T Piece and Clamp included

Add to cart
featured_image

Reducers with Lifting Lugs – 2″ to 2.5″

We have the following sizes in Steel Reducers that are fitted with 2 x 2T Lifting Lugs. 2.5 – 2″ x 600mm  – RED-252-600-LG 2.5 – 2″ x  900mm – RED-252-900-LG      

Add to cart
featured_image

Reducers with Lifting Lugs – 6″

Concrete Pump 8mm Heavy Duty Steel Reducer With Handle & Victaulic Ends including 2 x Lifting Lugs 6″ to 4″ x 900mm – RED-64-900-LG            

Add to cart
featured_image

Reducers with Lifting Lugs – 5″

Concrete Pump 8mm Heavy Duty Steel Reducer With Handle & Victaulic Ends including 2 x Lifting Lugs Lifting Lugs are 2 x 1T for 300mm. All other sizes have 2 x 2T Lifting Lugs. 5″ to 3″ x 600mm – RED-53-600-LG 5″ to 3″ x 900mm – RED-53-900-LG 5″ to 3.5″ x 600mm – RED-535-600-LG […]

Add to cart
featured_image

Reducers with Lifting Lugs – 4″ Non-Reducing

Concrete Pump 8mm Heavy Duty Non Reducing Steel Reducer With Handle & Victaulic Ends with lifting lugs 4.5″ to 3.5″ x 600mm – RED-4535-600-NR-LG 4.5″ to 3.5″ x 900mm – RED-4535-900-NR-LG                

Add to cart
featured_image

Reducers with Lifting Lugs – 4″

Concrete Pump 8mm Heavy Duty Steel Reducer With Handle & Victaulic Ends including 2 x  Lifting Lugs Lifting Lugs are 2 x 1T for 300mm. All other sizes have 2 x 2T Lifting Lugs.   4″ to 2″ x 600mm – RED-42-600-LG 4″ to 2″ x 900mm – RED-42-900-LG 4″ to 2″ x 1200mm – […]

Add to cart
featured_image

Reducers with Lifting Lugs – 3″

Concrete Pump 8mm Heavy Duty Steel Reducer With Handle & Victaulic Ends including 2 x Lifting Lugs   Lifting Lugs are 2 x 1T for 300mm. All other sizes have 2 x 2T Lifting Lugs.   3″ to 2″ x 300mm  – RED-32-300-LG 3″ to 2″ x 600mm – RED-32-600-LG 3″ to 2″ x 900mm […]

Add to cart
featured_image

Python Hopper Sleeve Safety Cover – Line Pump

Python Back Hopper Sleeve Safety Cover for Concrete Line Pumps Click on video link below to see this in operation

Add to cart
featured_image

Python Concrete Hose Safety Cover

Python Hose Sleeve – Safety Cover for Concrete hose

Add to cart
featured_image

Python Hopper Sleeve Safety Cover – Boom Pump

Python Back Hopper Sleeve Safety Cover for Concrete Boom Pumps

Add to cart
featured_image

Grease Cartridge

Cartridge of Black Tac Gulf Western Grease Available per cartridge or per box of 12 units.

Add to cart
featured_image

Concrete Primer Satchel – 300gm

Single Use Concrete Primer Satchel. 300gm – CP-Sat-300 Available separately or in a box of 50 satchels – CP-Sat-300-B

Add to cart
featured_image

Concrete Hose Stand – Fixed – Replacement Roller

Replacement roller only for Fixed Concrete Hose Stand  

Add to cart
featured_image

Heavy Duty Duct Tape

Rubber Adhesive 0.13mm thickness 48mm x 30m 60 rolls per carton

Add to cart
featured_image

Concrete Pump Safety Sign

Measures 21cm x 60cm x 30cm

Add to cart
featured_image

Black Annealed Tie Wire

• 1.57mm x 94m • Shipped as 10 rolls per carton • 64 Cartons per pallet (640 rolls)

Add to cart
featured_image

Disc Cutting Blades

All sizes come in packs of 50

Add to cart
featured_image

SuperLube 100™ Concrete Primer

SuperLube 100™ is a state-of-the-art liquid concrete pump primer uniquely formulated to provide the concrete contractor with a cost-effective replacement for premium priced grout, primer slurries or bagged cement primers. It is environmentally safe and compatible with all concrete materials and contains no bentonite, cementitious materials, soaps or air entraining agents. Advantages: – Liquid mixes […]

Add to cart
featured_image

Double Sided Spanner – Various Sizes

– For use with all victaulic bolt clamps – Extra length to assist with loosening high pressure bolt clamps – Please call for availability of other sizes –

Add to cart
featured_image

Wurth 1L Diesel Sprayer

Genuine Wurth Vacuum Pump Bottle with Viton seals for longer lasting use. Dispenses many chemical types including Diesel, Brake Cleaner, Degreasers. The 1 litre capacity bottle unscrews from the pump for easy filling. Adjustable spray nozzle for mist or jet. Durable plastic bottle.

Add to cart
featured_image

00 Truck Grease

Comes in a 15kg tub (18.7L)

Add to cart
featured_image

Concrete Pump Logbook

– 12 monthly logbook required for ALL concrete pumps

Add to cart
featured_image

Concrete Pump Remote Control

Genuine Elsema Gigalink 4 Channel Remote Replacement Plastic cover also available – REM-4CH-C

Add to cart
featured_image

Ultrasonic Thickness Tester

– Great for your monthly pipe tests as required in the concrete pump logbook – Simply put some clear liquid soap on the pipe, place probe on the soap and a digital reading is given. – Steel pipe measuring range from 1.2mm to 225mm – Auto calibration – Size 133mm x 70mm x 36mm. Weight […]

Add to cart
featured_image

24V Concrete Pump Hopper Vibrator

– Our special bolt hole patterns are designed to be compatible with all existing brands. Just use the existing mounting plate. It’s that easy. – Our hopper is commonly used on Junjin, Concord, Putzmeister, Schwing, Reed and many more – Includes easy to read instruction manual for installation ALSO AVAILABLE IN 12V – PLEASE CONTACT […]

Add to cart
featured_image

Concrete Boom Pump Outrigger Foot Pads

Made with heavy duty polyethylene material and includes a rope handle for easy lifting Available Sizes: Footpad Size Groove Diameter Load Capacity PCS Product Code 500mm x 500mm x 50mm (Thickness) 400mm 35T FP-500-400 600mm x 600mm x 60mm (Thickness) 400mm 45T FP-600-400

Add to cart
featured_image

Concrete Boom Drop Hose Clamp

**WARNING** – Drop Hose Clamp must be removed from hose before operating Concrete Pump !!

Add to cart
featured_image

Concrete Hose Placement Ring

Great for controlling direction of concrete flow out of a delivery/lead hose Available in sizes to suit 2.5″, 3″ 3.5″ and 4″ – 60cm Handle Width and 90cm Handle height Available in sizes to suit 3.5″ and 4″ with extended handle width 75cm and 105cm handle height (XL)

Add to cart
featured_image

Concrete Hose Hook

– Great for repositioning concrete hoses during use – Can be used on all sizes of concrete hoses

Add to cart
featured_image

Concrete Hose Stand – Foldable

Great for getting concrete hoses up and over formwork or when wanting to prevent the hose from being damaged over an edge. Dimensions when folded: 500mm x 500mm x 100mm Great for pumps with little room Lightweight stand with adjustable height function Replacement rollers also available  

Add to cart
featured_image

Concrete Hose Stand – Fixed

Great for getting concrete hoses up and over formwork or when wanting to prevent the hose from being damaged over an edge. Adjustable height from 200mm to 500mm Carbon steel rollers with bearings Replacement rollers also available  

Add to cart
featured_image

Concrete Hose Plate

Great for getting concrete hoses moved across mesh without any clamps getting caught up Made from heavy duty 3mm steel CHP-1 -Can be used on all concrete hoses between 2″ and 5″ CHP-1-S – For concrete hoses 2″, 2.5″ and 3″  

Add to cart
featured_image

Concrete Boom Pump Safety Sticker Set

Replacement pack of safety stickers for your concrete boom pump 53 pieces per set  

Add to cart
featured_image

Concrete Line/Trailer Pump Safety Sticker Set

Replacement pack of safety stickers for your concrete line/trailer pump 19 pcs per set  

Add to cart
featured_image

Water Pump and Drive Unit

Pump is a very popular heavy duty 50mm (2”) industrial pump with large 15mm core dry cable which provides wider access and easier flow. It is made with cast iron casing with wide passages to allow debris (up to 25mm) to pass through and can allow fluids containing up to 60% solids. The main shaft […]

Add to cart
featured_image

6m Extension Drive Shaft

A 6m Extension Shaft to suit all 3 dog Drive Flex Drive pumps or Vibrator Shafts, 15mm inner core cable, 60kg.

Add to cart
featured_image

5.5hp Crommelins Diesel Drive Unit

This 5.5hp Diesel Drive Unit will drive 2″ (50mm) Submersible Flexible Drive Pumps and Concrete Vibrators (with 3 dog shafts). It comes complete with a heavy-duty roll frame to protect it from damage and is backed by Crommelins award winning spare parts and service. The Diesel model is also suitable for mine applications where petrol […]

Add to cart
featured_image

6.0hp Crommelins Petrol Drive Unit

This 6.0hp Drive Unit will drive 2″ (50mm) Submersible Flexible Drive Pumps such as Crommelins FP2T model and Concrete Vibrators (See Crommelins JV range). It comes complete with a heavy-duty roll frame to protect it from damage and is backed by Crommelins award winning spare parts and service. (Upgraded from 5.0hp to 6.0hp) Features – […]

Add to cart
featured_image

Portable Concrete Vibrator Shaft

The Crommelins take-anywhere 45mm Portable Vibrator that will do several jobs that previously could only be done by larger drive units and shafts. The portability and weight means that this unit is easy to use and saves dragging around heavy Drive Units and Vibrator Shafts. Ideal for footings, stairways and foot paths. Crommelins have also […]

Add to cart
featured_image

Concrete Vibrator Shaft 6M Length

Coming in 25, 28, 38, 45, 60mm Vibe shaft Sizes these attach to ‘3 dog’ shafts on Drive units. They are designed to remove bubbles on concrete pours. The shaft is easy to service, has a high quality inner and outer shell and is backed by Crommelins 12 Month manufacturer’s warranty. Features – 2 Piece […]

Add to cart

Sorry, there are no products Continental 100 BAR Wire Braided Hose - Made in Canada right now

featured_image

Water Pump and Drive Unit

Pump is a very popular heavy duty 50mm (2”) industrial pump with large 15mm core dry cable which provides wider access and easier flow. It is made with cast iron casing with wide passages to allow debris (up to 25mm) to pass through and can allow fluids containing up to 60% solids. The main shaft […]

Add to cart
featured_image

6m Extension Drive Shaft

A 6m Extension Shaft to suit all 3 dog Drive Flex Drive pumps or Vibrator Shafts, 15mm inner core cable, 60kg.

Add to cart
featured_image

5.5hp Crommelins Diesel Drive Unit

This 5.5hp Diesel Drive Unit will drive 2″ (50mm) Submersible Flexible Drive Pumps and Concrete Vibrators (with 3 dog shafts). It comes complete with a heavy-duty roll frame to protect it from damage and is backed by Crommelins award winning spare parts and service. The Diesel model is also suitable for mine applications where petrol […]

Add to cart
featured_image

6.0hp Crommelins Petrol Drive Unit

This 6.0hp Drive Unit will drive 2″ (50mm) Submersible Flexible Drive Pumps such as Crommelins FP2T model and Concrete Vibrators (See Crommelins JV range). It comes complete with a heavy-duty roll frame to protect it from damage and is backed by Crommelins award winning spare parts and service. (Upgraded from 5.0hp to 6.0hp) Features – […]

Add to cart
featured_image

Portable Concrete Vibrator Shaft

The Crommelins take-anywhere 45mm Portable Vibrator that will do several jobs that previously could only be done by larger drive units and shafts. The portability and weight means that this unit is easy to use and saves dragging around heavy Drive Units and Vibrator Shafts. Ideal for footings, stairways and foot paths. Crommelins have also […]

Add to cart
featured_image

Concrete Vibrator Shaft 6M Length

Coming in 25, 28, 38, 45, 60mm Vibe shaft Sizes these attach to ‘3 dog’ shafts on Drive units. They are designed to remove bubbles on concrete pours. The shaft is easy to service, has a high quality inner and outer shell and is backed by Crommelins 12 Month manufacturer’s warranty. Features – 2 Piece […]

Add to cart
featured_image

CJ2 Cutting Teeth

For boring holes in extremely hard ground

Add to cart
featured_image

BFZ158 Weld On Tungsten Teeth

Product Code: SH-BFZ158

34mm x 20mm

Box of 100

Add to cart
featured_image

Weldable Bar BA13

Product Code: CT-BA13

55mm x 45mm

Box of 70

Add to cart
featured_image

Pin for CJ2 Teeth

Supplied in a Box of 100

Add to cart
featured_image

Pin for Pilot Head

Fits sizes 19mm, 25mm and 30mm

Add to cart
featured_image

5″ Static Line ST52 Pipes with PM Male/Female High-Pressure Ends

– 85BAR working pressure using ASTM1020 carbon steel – Painted in 2 Pac white colour – great for running long static lines in tunnels or other enclosed sites – Custom lengths made to order  

Add to cart
featured_image

5″ Twin wall Concrete Pump Pipes with Welded Victaulic Ends

– 60-65HRC hardening process. Korean made – Carbon insert long lasting victaulic ends – 85BAR working pressure using ASTM1020 carbon steel – Painted in 2 Pac white colour – Boom pipes (4.5mm) and deck pipes (7mm) available – Custom lengths made to order

Add to cart
featured_image

5″ Hardened/Heat Treated Concrete Boom Pump Pipes with Welded Victaulic Ends

– Korean made hardened pipes with 85BAR working pressure using 1020 carbon steel – Painted in 2 Pac white colour. – Heavy duty hardened slip on ends used. – Custom lengths made to order

Add to cart
featured_image

5″ Standard Boom/Static Line ST52 Concrete Pump Pipes with Welded Victaulic Ends

– A heavier grade Korean made seamless pipe used on static lines or concrete booms with a 5” pipeline – 85BAR working pressure using 1020 carbon steel – Painted in 2 Pac white colour. – Heavy duty slip on ends used. – Custom lengths made to order Available in 4.5mm thickness

Add to cart
featured_image

4.5″ Boom/Static Line Concrete Pump Pipes with Welded Victaulic Ends

Korean made 4″ pipes with metric Schwing 4.5″ welded on victaulic ends 85BAR Working pressure using 1020 carbon steel Painted in 2 Pac white colour Heavy duty slip on ends Please note 7mm pipes are made to order – Please allow 8-10 weeks for delivery Custom Lengths and colours also available. Please call 1300 210 […]

Add to cart
featured_image

4″ Boom/Static Line Concrete Pump Pipes with Welded Victaulic Ends

A heavier grade Korean made seamless pipe used on static lines or concrete booms with a 4″ pipeline 85BAR Working pressure using 1020 carbon steel Painted in 2 Pac white colour Heavy duty slip on ends Please note 7mm pipes are made to order – Please allow 8-10 weeks for delivery Custom Lengths and colours […]

Add to cart
featured_image

Lightweight Concrete Line Pump Delivery Pipes – 4″ I.D.

Korean made 3mm thick seamed pipe great for everyday line pump work 85BAR working pressure using 1020 carbon steel Painted in 2 pac white colour Heavy duty slip on ends Custom lengths and colours also available – Please call 1300 210 910 for more information

Add to cart
featured_image

Lightweight Concrete Line Pump Delivery Pipes – 3″ I.D.

Korean made 3mm thick seamed pipe great for everyday line pump work 85BAR working pressure using 1020 carbon steel Painted in 2 pac white colour Heavy duty slip on ends  

Add to cart
featured_image

Lightweight Concrete Line Pump Delivery Pipes – 2″ I.D.

These pipes are made to order with 8-10 weeks lead time Korean made 3mm thick seamed pipe great for everyday line pump work 85BAR working pressure using 1020 carbon steel Painted in 2 pac white colour Heavy duty slip on ends

Add to cart
featured_image

Wire Rope Bulldog Grip

Wire Rope Bulldog Grip Available in sizes from 8mm to 40mm

Add to cart
featured_image

Heavy Duty Duct Tape

Rubber Adhesive 0.13mm thickness 48mm x 30m 60 rolls per carton

Add to cart
featured_image

Black Annealed Tie Wire

• 1.57mm x 94m • Shipped as 10 rolls per carton • 64 Cartons per pallet (640 rolls)

Add to cart
featured_image

Galvanised Stocking with Thimble on Each Eye for Concrete Hoses

Product Codes:

CAB-100130-TH 2″ Hose ID 100-130mm Size Range
CAB-130180-TH 4/5″ Hose ID 130-180mm Size Range
CAB-180210-TH 5″ Hose ID 180-210mm Size Range

CUSTOM SIZES AVAILABLE ON REQUEST

Add to cart
featured_image

2″/3″/4″/5″ Galvanised Steel Safety Whip Check for Concrete Hoses

Available in 2 sizes: 6mm ID – 2T Load Rating – 120cm length 10mm ID- 5T Load Rating – 105cm length

Add to cart
featured_image

Blockfill Elbow 2″ x 180D

2″ (51mm) x 180D Block Fill Elbow with ends and handle

Add to cart
featured_image

Elbows with Slurry Pot

We have the following Elbows available with a Slurry Pot attached ELB-54-90D-300-SP – 5″ (127mm) x 90D Hopper Elbow with 5″ (127mm) to 4″ (102mm) x 300mm Reducer with Victaulic Ends with 4″ Victaulic Slurry Pot ELB-54-90D-RB-SP – 5″ (127mm) x 4″ (102mm) x 90D Reducing Short Radius Hopper Elbow with Victaulic Ends with 4″ […]

Add to cart
featured_image

5″ x R240 High-Manganese Cast Boom Elbows with Victaulic Ends-30D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown  

Add to cart
featured_image

4″ Weldable Steel Bends

Korean Made 7mm thick Available in 45D and 90D sizes.

Add to cart
featured_image

Concrete Pipe 180D Elbow

Available in 3″, 4″ and 5″ 3″ (76mm) x 180D Elbow with 2 Victaulic Ends,Handle & Lifting Lugs 4″ (102mm) x 180D Elbow with 2 Victaulic Ends, Handle & Lifting Lugs 5″ (127mm) x 180D Elbow with 2 Victaulic Ends, Handle & Lifting Lugs

Add to cart
featured_image

5″ Weldable Static Line Bends

Korean made 7mm thick bend, great for customising bends to suit your project needs. 5″ (127mm) Pipe I.D

Add to cart
featured_image

5″ Static Line Bends with Putzmeister Male/Female High Pressure Ends – 90D Elbow

– Korean made long radius bends great for setting up static lines – Painted in 2 Pac white colour. – A length to be measured as shown 5″ Pipe I.D. – 7mm Thickness

Add to cart
featured_image

5″ Static Line Bends with Putzmeister Male/Female High Pressure Ends – 45D Elbow

– Korean made long radius bends great for setting up static lines – Painted in 2 Pac white colour. – A length to be measured as shown 5″ Pipe I.D. – 7mm Thickness

Add to cart
featured_image

5″ Static Line Bends with Putzmeister Male/Female High Pressure Ends – 22D Elbow

– Korean made long radius bends great for setting up static lines – Painted in 2 Pac white colour. – A length to be measured as shown 5″ Pipe I.D. – 7mm Thickness

Add to cart
featured_image

5″ Twin Wall Boom Elbows with Welded on Hardened Victaulic Ends -90D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown 5″ Pipe I.D. – 7mm Thickness

Add to cart
featured_image

5″ Twin Wall Boom Elbows with Welded on Hardened Victaulic Ends -45D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown 5″ Pipe I.D. – 7mm Thickness

Add to cart
featured_image

5″ Twin Wall Boom Elbows with Welded on Hardened Victaulic Ends -22D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown 5″ Pipe I.D. – 7mm Thickness

Add to cart
featured_image

5″ Static Line Bends with Welded on Hardened Victaulic Ends -15D

– Korean made long radius bends- Great for setting up static lines – Painted in 2 Pac white colour – “A” Length to be measured as shown 5″ Pipe I.D – 7mm Thickness

Add to cart
featured_image

5″ Twin Wall Boom Elbows with Welded on Hardened Victaulic Ends -90D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown 5″ Pipe I.D. – 11/13mm Thickness

Add to cart
featured_image

5″ Twin Wall Boom Elbows with Welded on Hardened Victaulic Ends -45D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown  

Add to cart
featured_image

5″ Twin Wall Boom Elbows with Welded on Hardened Victaulic Ends -30D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown  

Add to cart
featured_image

5″ Twin Wall Boom Elbows with Welded on Hardened Victaulic Ends -20D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown  

Add to cart
featured_image

5″ Twin Wall Boom Elbows with Welded on Hardened Victaulic Ends -15D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown  

Add to cart
featured_image

5″ Twin Wall Boom Elbows with Welded on Hardened Victaulic Ends -10D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown  

Add to cart
featured_image

5″ High-Manganese Cast Boom Elbows with Victaulic Ends-90D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown 5″ Pipe I.D. – 11/13mm Thickness Fatback Elbow shown in Pic 3 (ELB-5-R275-90D-FB)

Add to cart
featured_image

5″ High-Manganese Cast Boom Elbows with Victaulic Ends-45D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown  

Add to cart
featured_image

5″ x R275 High-Manganese Cast Boom Elbows with Victaulic Ends-30D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown  

Add to cart
featured_image

5″ High-Manganese Cast Boom Elbows with Victaulic Ends-20D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown  

Add to cart
featured_image

5″ High-Manganese Cast Boom Elbows with Victaulic Ends-15D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown  

Add to cart
featured_image

5″ High-Manganese Cast Boom Elbows with Victaulic Ends-10D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown  

Add to cart
featured_image

4″ Line Pump Elbows with Welded Victaulic Ends – 90D

– Korean made 7mm thick elbows for everyday line pump work – 85BAR working pressure using 1020 carbon steel – Painted in 2 Pac white colour. – “A” Length to be measured as shown 4″ Pipe I.D – 7mm Thickness

Add to cart
featured_image

4″ Line Pump Elbows with Welded Victaulic Ends – 45D

– Korean made 7mm thick elbows for everyday line pump work – 85BAR working pressure using 1020 carbon steel – Painted in 2 Pac white colour. – “A” Length to be measured as shown 4″ Pipe I.D. – 7mm Thickness

Add to cart
featured_image

4″ Line Pump Elbows with Welded Victaulic Ends – 60D

– Korean made 7mm thick elbows for everyday line pump work – 85BAR working pressure using 1020 carbon steel – Painted in 2 Pac white colour. – “A” Length to be measured as shown  

Add to cart
featured_image

4″ Line Pump Elbows with Welded Victaulic Ends – 35D

– Korean made 7mm thick elbows for everyday line pump work – 85BAR working pressure using 1020 carbon steel – Painted in 2 Pac white colour. – “A” Length to be measured as shown  

Add to cart
featured_image

4″ Line Pump Elbows with Welded Victaulic Ends – 22D

– Korean made 7mm thick elbows for everyday line pump work – 85BAR working pressure using 1020 carbon steel – Painted in 2 Pac white colour. – “A” Length to be measured as shown 4″ – 102mm Pipe I.D. – 7mm Thickness

Add to cart
featured_image

4″ Line Pump Elbows with Welded Victaulic Ends – 15D

– Korean made 7mm thick elbows for everyday line pump work – 85BAR working pressure using 1020 carbon steel – Painted in 2 Pac white colour. – “A” Length to be measured as follows 4″ – 102mm Pipe I.D. – 7mm Thickness

Add to cart
featured_image

3″ Line Pump Elbows with Welded Victaulic Ends – 90D

– Korean made 7mm thick elbows for everyday line pump work – 85BAR working pressure using 1020 carbon steel – Painted in 2 Pac white colour. – “A” Length to be measured as follows 3″ – 76mm Pipe I.D. – 7mm Thickness

Add to cart
featured_image

3″ Line Pump Elbows with Welded Victaulic Ends – 45D

– Korean made 7mm thick elbows for everyday line pump work – 85BAR working pressure using 1020 carbon steel – Painted in 2 Pac white colour. – “A” Length to be measured as shown 3″ – 76mm Pipe I.D. – 7mm Thickness

Add to cart
featured_image

6m Extension Drive Shaft

A 6m Extension Shaft to suit all 3 dog Drive Flex Drive pumps or Vibrator Shafts, 15mm inner core cable, 60kg.

Add to cart
featured_image

5.5hp Crommelins Diesel Drive Unit

This 5.5hp Diesel Drive Unit will drive 2″ (50mm) Submersible Flexible Drive Pumps and Concrete Vibrators (with 3 dog shafts). It comes complete with a heavy-duty roll frame to protect it from damage and is backed by Crommelins award winning spare parts and service. The Diesel model is also suitable for mine applications where petrol […]

Add to cart
featured_image

6.0hp Crommelins Petrol Drive Unit

This 6.0hp Drive Unit will drive 2″ (50mm) Submersible Flexible Drive Pumps such as Crommelins FP2T model and Concrete Vibrators (See Crommelins JV range). It comes complete with a heavy-duty roll frame to protect it from damage and is backed by Crommelins award winning spare parts and service. (Upgraded from 5.0hp to 6.0hp) Features – […]

Add to cart
featured_image

Portable Concrete Vibrator Shaft

The Crommelins take-anywhere 45mm Portable Vibrator that will do several jobs that previously could only be done by larger drive units and shafts. The portability and weight means that this unit is easy to use and saves dragging around heavy Drive Units and Vibrator Shafts. Ideal for footings, stairways and foot paths. Crommelins have also […]

Add to cart
featured_image

Concrete Vibrator Shaft 6M Length

Coming in 25, 28, 38, 45, 60mm Vibe shaft Sizes these attach to ‘3 dog’ shafts on Drive units. They are designed to remove bubbles on concrete pours. The shaft is easy to service, has a high quality inner and outer shell and is backed by Crommelins 12 Month manufacturer’s warranty. Features – 2 Piece […]

Add to cart
featured_image

Continental Food Processing Washdown Hose

Product Information APPLICATION: A high quality economical construction for hot water up to 200F (93C) clean up service in food processing plants, dairies, packing houses, bottling plants, breweries and creameries. CONSTRUCTION TUBE: Black Nitrile synthetic rubber, RMA Class A (High oil resistance), non FDA COVER: WhiteChemivic synthetic rubber, RMA Class A (High oil resistance) REINFORCEMENT: […]

Add to cart
featured_image

Continental Food Processing Washdown Hose

Product Information APPLICATION: A high-quality, economical construction for hot water up to 200˚F (93˚C) clean up service in food processing plants, dairies, packing houses, bottling plants, breweries, canneries and creameries CONSTRUCTION TUBE: Black Nitrile synthetic rubber, RMA Class A (High Oil Resistance), non-FDA COVER: White Chemivic™ synthetic rubber, RMA Class A (High Oil Resistance) REINFORCEMENT: […]

Add to cart
featured_image

Continental Plicord Extremeflex Petroleum Transfer Hose – Made in USA

Product Information APPLICATION: An extremely flexible and lightweight drop hose for use in tank truck and in-plant operation to transfer diesel, ethanol, gasoline, oil and petroleum base products up to 60% aromatic content. Corrugated construction for lower drag coefficient and superior abrasion resistance. CONSTRUCTION TUBE: Black Nitrile synthetic rubber (Class A oil resistance) COVER: Black […]

Add to cart
featured_image

Continental Oil Suction & Discharge Hose

Product Information APPLICATION: General purpose hose used to transfer gasoline, oil and other petroleum based products. Hose is designed for pressure, gravity flow or suction service CONSTRUCTION TUBE: NBR (Oil resistant) COVER: Black NBR (Oil resistant); wrapped finish REINFORCEMENT: Synthetic fabric plies (2) with wire helix TEMPERATURE: -20˚C to 70˚C

Add to cart
featured_image

Continental Petrol & Oil Delivery Hose

Product Information APPLICATION: General purpose hose for use in the discharge of gasoline, oil and other petroleum based products. CONSTRUCTION TUBE: NBR (Oil resistant) COVER: Black NBR (Oil resistant); wrapped finish REINFORCEMENT: Synthetic fabric plies (2) TEMPERATURE: -20˚C to 70˚C

Add to cart
featured_image

Continental Fuel Line/Emission Control Hose – Made in USA

Product Information APPLICATION: : Multipurpose hose for use on fuel line, PCV and EEC systems. The HysuniteR hose cover is oil and petrol resistant and withstands exposure to fuel, vapour, moisture and high heat up to 125°C.The rubber tube is specially compounded to resist diesel, oil and unleaded petrol and blends of ethanol, methanol and […]

Add to cart
featured_image

Continental Blue Oil Suction Hose

Product Information APPLICATION: Highly flexible blue Nitrile hose used in tank truck and in-plant operations to transfer some fuel,oil and other petroleum based products. Hose is designed for pressure, gravity flow or full suction service, which makes it a great choice for the collection of waste products and chemicals found in grease trap and septic […]

Add to cart
featured_image

Continental G820 Fabric Hose Assemblies – 4″

Custom lengths available upon request Our 4” hoses are also available with a 4.5” Metric (Schwing) End to 4” Hose Tail. Please specify when ordering by adding a -45 to any of the above PCS product codes. Example G820-40-10D-45

Add to cart
featured_image

Continental G820 Fabric Hose Assemblies – 3.5″

Custom lengths available upon request Our 3.5” hoses are also available with following fittings: 4” to 3.5” Non-Reducing Hose Tail. Please specify when ordering by adding a -NR to any of the above PCS product codes. Example G820-35-10D-NR 4.5” Metric (Schwing) to 3.5” Reducing Hose Tail. Please specify when ordering by adding a -45 to […]

Add to cart
featured_image

Continental G820 Fabric Hose Assemblies – 2.5″

Custom lengths available upon request Our 2.5” hoses are also available with a 3” to 2.5” Non-Reducing Hose Tail. Please specify when ordering by adding a -NR to any of the above PCS product codes. Example G820-25-10D-NR

Add to cart
featured_image

Continental G820 Fabric Hose only – 2″ – 4″

Custom lengths available upon request Product Information APPLICATION: Goodyear’s G820 Super Concrete Delivery is a premium quality hose for heavy duty/high pressure concrete placement applications in concrete structures, dams, tunnel faces etc. Ideal for use as a flexible connection between pumping equipment and hard piping. CONSTRUCTION TUBE: 6.4mm Black TufsynR SyntheticR Rubber COVER: 2.4mm Black […]

Add to cart
featured_image

Grey Water Suction Hose

Product Information APPLICATION: EPFLEX Grey Water Suction Hose is a general purpose suction hose used in industrial, agricultural and Construction applications. Its high grade properties make it suitable to convey water, mud, light slurries, grain, sand and some chemicals. CONSTRUCTION TUBE: Grey PVC REINFORCEMENT: Rigid PVC helix TEMPERATURE: -5˚C to 60˚C

Add to cart
featured_image

20BAR/300psi Grout Hose Assembly

Product Information APPLICATION: General purpose hose for use in heavy duty service for a wide range of applications. CONSTRUCTION TUBE: NR / SBR Blended COVER: Black SBR / EPDM Blended; wrapped finish REINFORCEMENT: Synthetic fabric plies (2) TEMPERATURE: -20˚C to 70˚C

Add to cart
featured_image

Double Bolt Clamp

Heavy duty steel double bolt clamp for high pressure applications Other sizes available on request

Add to cart
featured_image

4 Bolt Claw Clamp

Heavy duty steel 4 bolt claw clamp for high pressure applications

Add to cart
featured_image

2 Bolt Claw Clamp

Heavy duty steel 2 bolt claw clamp for high pressure applications

Add to cart
featured_image

Extended Length Concrete Hose Ferrule

Extended length steel ferrule for concrete hose tails

Add to cart
featured_image

Standard Length Concrete Hose Ferrule

Steel Ferrule for concrete hose tails

Add to cart
featured_image

Non Reducing Concrete Hose Tail and Ferrule Set

Non-Reducing type Hardened reducing victaulic end x hose tail with Ferrule set

Add to cart
featured_image

Reducing Concrete Hose Tail and Ferrule Set

Reducing type Hardened Reducing Victaulic End x Hose Tail with Ferrule set

Add to cart
featured_image

Extended Length Concrete Hose Fitting

Extended length hose tail x Victaulic end

Add to cart
featured_image

Reducing Concrete Hose Fitting

Hardened Hose Tail x Victaulic end

Add to cart
featured_image

Non-Reducing Concrete Hose Fitting

Hardened Hose Tail x Victaulic End

Add to cart
featured_image

Standard Concrete Hose Fitting

Hardened Hose tail x Victualic end

Add to cart
featured_image

Red Medium Duty Layflat Hose Assemblies with Fabric Outer Layer and Bauer Fittings

Product Information APPLICATION: For medium-duty discharge applications in mining, construction, industry, agriculture and marine service. Limited oil and chemical application. Also recommended for sprinkler pivot and water transport. CONSTRUCTION TUBE: Red PVC compound COVER: Red PVC compound REINFORCEMENT: Spiral synthetic yarn, one layer longitudinal synthetic yarn TEMPERATURE: -23°C to 77°C

Add to cart
featured_image

Red Medium Duty Layflat Hose Assemblies with Fabric Outer Layer and Camlock Ends

Product Information APPLICATION: For medium-duty discharge applications in mining, construction, industry, agriculture and marine service. Limited oil and chemical application. Also recommended for sprinkler pivot and water transport. CONSTRUCTION TUBE: Red PVC compound. COVER: Red PVC compound. REINFORCEMENT: Spiral synthetic yarn, one layer longitudinal synthetic yarn TEMPERATURE: -23°C to 77°C

Add to cart
featured_image

Red Medium Duty Layflat Hoses with Fabric Outer Layer – Hose only

Please note the 1 ½” and 2” hoses are available in 100m lengths with 8-10 weeks lead time Product Information APPLICATION: For medium-duty discharge applications in mining, construction, industry, agriculture and marine service. Limited oil and chemical application. Also recommended for sprinkler pivot and water transport. CONSTRUCTION TUBE: Red PVC compound. COVER: Red PVC compound. […]

Add to cart
featured_image

Blue Light Duty Layflat Hose

Product Information APPLICATION: For light-duty water discharge applications in mining, construction, industry, agricultural and marine service. CONSTRUCTION TUBE: Blue PVC compound. COVER: Blue PVC compound. REINFORCEMENT: Synthetic fabric TEMPERATURE: -23°C to 77°C

Add to cart
featured_image

Lifting Slings – Flat

Available in sizes ranging from 1 Ton, 0.5M length to 4 Ton, 5M length

Other sizes and lengths are available upon request

Please refer to catalogue for Product Codes

Add to cart
featured_image

Lifting Slings – Round

Available in Sizes from 1 Ton – 0.5m to 4 Ton – 5m

Other sizes and lengths are available upon request

Add to cart
featured_image

Continental Plicord Torridair Hot Air Blower

Product Information APPLICATION: Designed to transfer hot, non-oily air (up to 400˚F) from manifold blowers or in-plant compressors to holding tanks used in the transfer of dry bulk materials. CONSTRUCTION TUBE: Black, STF (Super Thermo-Flo) VersigardR synthetic rubber COVER: Black, weather-resistant, STF (Super Thermo-Flo) VersigardR synthetic rubber (wrapped impression) REINFORCEMENT: Spiral-plied synthetic fabric with double […]

Add to cart
featured_image

Continental Black Softwall Hose

Product Information APPLICATION: For the discharge of dry bulk cement from tank truck and in-plant service. CONSTRUCTION TUBE: 1/8” (static dissipating/static conductive) Black TufsynR synthetic rubber. Available in 1/8”,3/16”, and 1/4” tube gauges COVER: Black PlioflexR synthetic rubber with white spiral stripe (wrapped impression) REINFORCEMENT: Spiral-plied synthetic fabric TEMPERATURE: -32˚C to 82˚C Used with Type […]

Add to cart
featured_image

Continental Muff Coupling Hose

Product Information APPLICATION: An abrasive slurry hose to be used in conjunction with split muff couplings (also available).The hose has the high strength needed to handle pressure or suction service in the transfer of dry bulk, slurry, salt, cement, fertilisers and a limited number of oil based products. CONSTRUCTION TUBE: SBR / NBR Blended COVER: […]

Add to cart
featured_image

Continental Material Handling Vacuum Hose

Product Information APPLICATION: The ArtracR hose is used for a variety of abrasive, material-handling applications to transfer sand, gravel, cement, fly ash, glass, metals, plastic pellets, fertilizers, rock salts and slurries. CONSTRUCTION TUBE: Thermoplastic alloyed blend of polyurethane and PVC (static dissipating/static conductive) COVER: Thermoplastic alloyed blend of nitrile, polyurethane, and PVC (nonconductive) REINFORCEMENT: Rigid […]

Add to cart
featured_image

Continental Premium Clear Vinyl Tubing Hose

Product Information APPLICATION: General purpose low pressure tubing suitable for use with air, water, food, beverage, fuel and oil applications. Conforms to AS2070 (non toxic food grade) CONSTRUCTION TUBE: Clear Blue Tint Virgin PVC TEMPERATURE: -10˚C to 60˚C

Add to cart
featured_image

Continental Safety Yellow Hose with Ribbed Finish

Product Information APPLICATION: A versatile heavy duty PVC hose suitable for use in compressed air and water applications. EPFLOW Safety Yellow has excellent UV resistance to withstand the extreme Australian condition and the highly visible yellow ribbed cover provides superior abrasion resistance. Conforms to AS2554-Class B CONSTRUCTION TUBE: Black PVC COVER: Yellow PVC, Ribbed finish, […]

Add to cart
featured_image

Continental Food Processing Washdown Hose

Product Information APPLICATION: A high-quality, economical construction for hot water up to 200˚F (93˚C) clean up service in food processing plants, dairies, packing houses, bottling plants, breweries, canneries and creameries CONSTRUCTION TUBE: Black Nitrile synthetic rubber, RMA Class A (High Oil Resistance), non-FDA COVER: White Chemivic™ synthetic rubber, RMA Class A (High Oil Resistance) REINFORCEMENT: […]

Add to cart
featured_image

Continental Blue Pliovic Premium Air Toil Hose with Nitto Fittings (Made in USA)

Product Information APPLICATION: A lightweight, economical general purpose hose for carrying air, water and many spray solutions. PliovicR is suitable for a wide range of industrial, construction, agricultural hand sprayers and many multipurpose applications. Non-conductive, minimum electrical resistance greater than one (1) megohm per inch of hose length at 1000 Volts DC. Available in PliovicR […]

Add to cart
featured_image

Continental Clear Multipurpose Transfer Hose

Product Information APPLICATION: A versatile lightweight multipurpose hose suitable for food and beverage, general industrial and agricultural applications. EPFLOW Clear Multipurpose hose is also suitable to transfer fuel and oil based products. Conforms to AS2070 (non toxic food grade) and AS2554 CONSTRUCTION TUBE: Clear PVC COVER: Clear PVC, Blue tint, UV stabilised REINFORCEMENT: Polyester with […]

Add to cart
featured_image

Continental Red Air Multipurpose Hose (Made in USA)

Product Information APPLICATION: A good-quality, economical general purpose hose for industrial air service, compressor lines, pneumatic tools, low-pressure spray and many other applications where the need for oil resistance is moderate. Non-conductive, minimum electrical resistance greater than one (1) megohm per inch of length of hose at 1000 V DC. CONSTRUCTION TUBE: Nitrile synthetic rubber, […]

Add to cart
featured_image

Lightweight Wire Braid Hose – 2″

Product Information APPLICATION: : PCS 85 BAR Wire Braided Concrete Hose is a heavy duty hose used for concrete placement applications in concrete structures, dams, tunnel faces etc. Ideal for use as a flexible connection between pumping equipment and hard piping. REINFORCEMENT: High-strength wire TEMPERATURE: -32˚C to 82˚C

Add to cart
featured_image

Zembrone Heavy Duty 2-piece Pile Cage Foot

Test certificates available on request

Add to cart
featured_image

Zembrone Yellow Safety Bar Cap 12-20mm

Test Certificate available on request Pack Quantity – 100 pieces Pallet Quantity – 50 packs

Add to cart
featured_image

Zembrone Orange Reo Safety Bar Cap/Sock 24-36mm

Zembrone spacers are AS/NSZ 2425-2015 compliant please call for our test report

Add to cart
featured_image

Zembrone Yellow Heavy Duty Safety Bar Cap 12-20mm

Zembrone spacers are AS/NSZ 2425-2015 compliant please call for our test report

Add to cart
featured_image

Helix Spacer With Safety Clip

Please call for our test report

Add to cart
featured_image

Heavy Duty Spacer With Safety Clip

Product Codes:
50mm SPC-50
75mm SPC-75
85mm SPC-85
100mm SPC-100

TO ORDER PER PALLET, PLEASE ADD -P TO END OF PRODUCT CODE

Add to cart
featured_image

Stainless Steel Pressure Gauge – BSPT

Liquid filled 65mm dial face Stainless steel pressure gauge 1/4 BSPT Connection

Add to cart
featured_image

Stainless Steel Pressure Gauge – BSPP

Liquid filled 65mm dial face Stainless steel pressure gauge 1/4 BSPP Connection

Add to cart
featured_image

Continental High Pressure Washer Hose (Made in USA) with Male/Female fittings

Product Information APPLICATION: For use on pressure washer machines with working pressures up to 4500 psi. CONSTRUCTION TUBE: Nitrile synthetic rubber COVER: Black or Blue oil-resistant synthetic rubber, RMA Class B (Medium Oil Resistance) REINFORCEMENT: Braided (2) steel wires TEMPERATURE: -20°F to 250°F (-29°C to 121°C)

Add to cart
featured_image

Bolt/Nut/Washer – Set of 2

Used with our hose repair half clamp

Add to cart
featured_image

Hose Repair Kit for Concrete Delivery Hose

Includes: -Hose Half Clamp with Bolt/Nut -Hardened Hose Tail with Victaulic End

Add to cart
featured_image

Bolle Rush + Black Safety Glasses

Built in brow protection coating
Co-injected, ultra flex temples, Non-slip bridge

Tested and Approved to AS/NZS 1337.1.2010 for meium impact protection. Resists a 6mm at 4 m/s
100% UV 400 – Smoke

Product Code: SA-SUN-BL-BLE

Add to cart
featured_image

Bolle Rush + Clear Safety Glasses

Built in brow protection coating
Co-injected, ultra-flex temples
Non slip bridge

Tested and Approved to AS/NZS 13371.1.2010 for medium impact protection. Resists a 6mm at 45m/s
100% UV 385 – Clear

Product Code: SA-SUN-CL-BLE

Add to cart
featured_image

Black Budget Safety Glasses

One piece clear polycarbonate lens with anti-mist treatment
Lightweight black nylon frame with built-in brow guard.
Built-in side protection
Low energy impact protection with 400nm UV protection.
Also available with clear lens

Product Code: SA-SUN-BL

Add to cart
featured_image

Clear Budget Safety Glasses

Medium impact protection; AS/NZS 1337.1:2010 BMP 557823, 99.9% UV Protection
Outstanding optical quality; Impact resistant lens
Anti fog coating for humid conditions. Light wrap around design
Also available in Smoke colour

ProDuct Code:SA-SUN-CL

Add to cart
featured_image

Soft Leather Rigger Gloves

Good quality full-grain unlined cowhide glove
Field of application: All-round work glove for environments and situations where leather gloves are required

Available in Large and Extra-Large

12 pairs per pack
144 pairs per box

 

Add to cart
featured_image

Black Nitrile Gloves

Seamless knitted black nylon liner with knitted, elasticated cuffs.
Nitrile coating to palms and fingertips, provides excellent dexterity with precise grip
Added surface to provide extra grip during application

Available in Large GLV-N-L and Extra Large GLV-N-XL

Available in packs of 12 pairs or box of 144 pairs

Add to cart
featured_image

D Shackle Screw Pin

Available in sizes ranging from 0.5T 6-8mm through to 4.7T 19-22mm

Please refer to catalogue for sizes and product codes

More sizes are available on request

Add to cart
featured_image

Bow Shackle Screw Pin

Available in sizes ranging from 0.5T 6-8mm through to 4.7T 19-22mm

Additional sizes available on request

Add to cart
featured_image

Gumboots – Steel Cap – Blundstone

Blundstone Yellow Tag Gumboots with Steel Cap Available in Sizes 9-13

Add to cart
featured_image

2″ O Ring and Washer Set

Replacement parts for a 2″ shotcrete spray gun. Set includes 2 x rubber O rings and 1 x steel washer  

Add to cart
featured_image

19mm Galvanised F/F Elbow

Replacement part for a 2″ shotcrete spray gun  

Add to cart
featured_image

2″ Female BSP Screw Ring

Replacement part for a 2″ shotcrete spray gun  

Add to cart
featured_image

Worm Drive Clamps 64-76mm

Replacement part for a 2″ shotcrete spray gun. Used to secure shotcrete nozzle tips  

Add to cart
featured_image

19mm Galvansed Elbow and Welded Ring – Twin Fitting

Replacement part for a 2″ Shotcrete spray gun – two fittings  

Add to cart
featured_image

19mm Galvansed Elbow and Welded Ring

Replacement part for a 2″ shotcrete spray gun   Also available with twin fittings

Add to cart
featured_image

Extended Shotcrete Nozzle Tip – Hard – Green

2″ x 450mm Green hard poly extended shotcrete nozzle tip  

Add to cart
featured_image

Extended Shotcrete Nozzle Tip – Medium – Blue

Blue 2″ x 200mm extended length medium hardness rubber shotcrete nozzle  

Add to cart
featured_image

Shotcrete Nozzle Tip – Soft – Black

Black 2″ x 100mm soft natural rubber shotcrete nozzle tip  

Add to cart
featured_image

Shotcrete Nozzle Tip – Medium – Blue

Blue 2″ x 100mm medium hardness rubber shotcrete nozzle  

Add to cart
featured_image

Shotcrete Nozzle Tip – Hard – Green

Green 2″ x 100mm hard poly shotcrete nozzle tip  

Add to cart
featured_image

2″ Shotcrete Extended Hose Tail and Ferrule Set

2″ shotcrete extended 120mm hose tail and ferrule set with female BSP thread  

Add to cart
featured_image

2″ Shotcrete Hose Tail and Ferrule Set

2″ Shotcrete hose tail and ferrule set with female BSP thread. PCS can fit these onto any 2″ concrete hose.  

Add to cart
featured_image

Shotcrete Hose Tail x Female BSP Thread

Used to convert a 2″ single end hose into a shotcrete spray hose  

Add to cart
featured_image

2″ Shotcrete Victaulic End x Female BSP Hose Connector

Used when a standard 2″ concrete hose needs to be converted into a shotcrete spray hose  

Add to cart
featured_image

2″ Shotcrete Victaulic End x Male BSP Hose Connector

Used when a shotcrete spray gun hose needs to be converted into a standard 2″ concrete hose  

Add to cart
featured_image

2″ Hardened Shotcrete Barrel

Replacement part for shotcrete spray gun. 4.6mm hole for improved air flow  

Add to cart
featured_image

2″ Twin Fitting Shotcrete Spray Gun Assembly

Ready to use set comes with 19mm fittings, stainless steel ball valve and rubber spray nozzle. Used when chemical applications are needed to be added to the mix  

Add to cart
featured_image

2″ Shotcrete Spray Gun Assembly

Ready to use assembly comes with 19mm fittings, hardened barrel stainless steel ball valve and rubber spray nozzle.

Add to cart
featured_image

250psi Yellow Continental Air/Water Hose Assembly

Made in USA Comes with Crimped on Type A Fittings – Available in 19mm and 25mm I.D Custom Lengths available on request

Add to cart
featured_image

2″ PCS Lightweight Wire Braided Shotcrete Hose

Made in Turkey Crimped fittings include one victaulic end and one BSP female end High pressure hose with 85BAR W.P. Available in 10 metre, 15 metre and 20 metre lengths Custom lengths available upon request. Standard double ended feeder concrete hoses from 2″ up to 5″ also available

Add to cart
featured_image

2″ Continental ‘Made in Germany’ Allcrete Wire Braided Shotcrete Hose

Crimped fittings include one victaulic end and one BSP female end. High pressure hose with 85BAR W.P. Custom lengths available upon request Standard double ended feeder concrete hoses from 2″ up to 5″ also available

Add to cart
featured_image

2″ Continental ‘Made in Canada’ Allcrete Fabric Shotcrete Hose

Crimped fittings include one victaulic end and one BSP Female end High pressure hose With 85BAR W.P. Custom Lengths available on request Standard double ended feeder concrete hoses from 2″ up to 5″ also available

Add to cart
featured_image

Camlock Rubber Seals

Available in Packs of 5 pieces

Add to cart
featured_image

Type DC Stainless Steel Camlock

Female Camlock Adaptor x End Cap

Add to cart
featured_image

Type F Stainless Steel Camlock

Male Camlock Adaptor x Male BSP Thread

Add to cart
featured_image

Type E Stainless Steel Camlock

Male Camlock Adaptor x Hose tail Hose Tail can be secured inside the hose using our T-Bolt Superclamps (See Page 15)

Add to cart
featured_image

Type D Stainless Steel Camlock

Female Camlock x Female BSP Thread

Add to cart
featured_image

Type C Stainless Steel Camlock

Female Camlock Adaptor x Hose Tail Hose tail can be secured inside the hose using our T Bolt Superclamps (See Page 15)

Add to cart
featured_image

Type B Stainless Steel Camlock

Female Camlock Adaptor x Male BSP Thread

Add to cart
featured_image

Type A Stainless Steel Camlock

Male Camlock Adaptor x Female BSP Thread

Add to cart
featured_image

Shut Off Valve – Hand Operated

Available in 4″ (102mm) and 5″ (127mm)   Concrete Hand Operated Hydraulic Shut Off Bullet Valve with T Piece and Clamp included

Add to cart
featured_image

Wall Bracket with Double U-Bolt

Used for static lines placed up against a wall   Static line concrete pipe brackets Base plate size 200mm x 240mm with 22mm holes M18 threaded U-Bolt Bracket allows for 125mm clearance between ground and the pipe 150mm clearance brackets are available with lead-time of 10-12 weeks

Add to cart
featured_image

Floor Bracket with Single U-Bolt

Used for static lines being run along the ground   Static line concrete pipe brackets Base plate size 200mm x 240mm with 22mm holes M18 threaded U-Bolt Bracket allows for 125mm clearance between ground and the pipe 150mm clearance brackets are available with lead-time of 10-12 weeks

Add to cart
featured_image

U-Bolt

Used for securing pipes to the ground/wall where a floor/wall bracket cannot be used

Add to cart
featured_image

U-Bolt with Weldable Base Plate

Used for securing pipes to the ground/wall where a floor/wall bracket cannot be used. Available in 4″ – UB-4-B and 5″ – UB-5-B Also available with a rubber coating on the U-Bolt – UB-5-B-R

Add to cart
featured_image

Continental Flexsteel 250 Steam Hose

Product Information APPLICATION: For cleaning, heat control, fire prevention, pumping, thawing, blow-out service, steam pumps and hoists in open-end or permanent installation operations. It is used in refineries, shipyards, chemical plants, steel mills, foundries and heavy industrial applications where high strength is required and where sever environmental conditions are encountered. CONSTRUCTION TUBE: PyrosynR synthetic rubber […]

Add to cart
featured_image

Reducers with Lifting Lugs – 2″ to 2.5″

We have the following sizes in Steel Reducers that are fitted with 2 x 2T Lifting Lugs. 2.5 – 2″ x 600mm  – RED-252-600-LG 2.5 – 2″ x  900mm – RED-252-900-LG      

Add to cart
featured_image

Reducers with Lifting Lugs – 6″

Concrete Pump 8mm Heavy Duty Steel Reducer With Handle & Victaulic Ends including 2 x Lifting Lugs 6″ to 4″ x 900mm – RED-64-900-LG            

Add to cart
featured_image

Reducers with Lifting Lugs – 5″

Concrete Pump 8mm Heavy Duty Steel Reducer With Handle & Victaulic Ends including 2 x Lifting Lugs Lifting Lugs are 2 x 1T for 300mm. All other sizes have 2 x 2T Lifting Lugs. 5″ to 3″ x 600mm – RED-53-600-LG 5″ to 3″ x 900mm – RED-53-900-LG 5″ to 3.5″ x 600mm – RED-535-600-LG […]

Add to cart
featured_image

Reducers with Lifting Lugs – 4″ Non-Reducing

Concrete Pump 8mm Heavy Duty Non Reducing Steel Reducer With Handle & Victaulic Ends with lifting lugs 4.5″ to 3.5″ x 600mm – RED-4535-600-NR-LG 4.5″ to 3.5″ x 900mm – RED-4535-900-NR-LG                

Add to cart
featured_image

Reducers with Lifting Lugs – 4″

Concrete Pump 8mm Heavy Duty Steel Reducer With Handle & Victaulic Ends including 2 x  Lifting Lugs Lifting Lugs are 2 x 1T for 300mm. All other sizes have 2 x 2T Lifting Lugs.   4″ to 2″ x 600mm – RED-42-600-LG 4″ to 2″ x 900mm – RED-42-900-LG 4″ to 2″ x 1200mm – […]

Add to cart
featured_image

Reducers with Lifting Lugs – 3″

Concrete Pump 8mm Heavy Duty Steel Reducer With Handle & Victaulic Ends including 2 x Lifting Lugs   Lifting Lugs are 2 x 1T for 300mm. All other sizes have 2 x 2T Lifting Lugs.   3″ to 2″ x 300mm  – RED-32-300-LG 3″ to 2″ x 600mm – RED-32-600-LG 3″ to 2″ x 900mm […]

Add to cart
featured_image

Reducers with Slurry Pot

We currently have 3 Reducers available with a Slurry Pot Steel Reducer With Handle & Victaulic Ends-8mm Heavy Duty with 3″ Victaulic Slurry Pot RED-43-600-SP  –   4″ (102mm) to 3″ (76mm) x 600mm long Steel Reducer With Handle & Victaulic Ends-8mm Heavy Duty with 4″ Victaulic Slurry Pot RED-54-600-SP –    5″ (127mm)  to 4″ […]

Add to cart
featured_image

1200mm Length Reducers

Please see table for sizes available Custom sizes can be made to order. Minimum quantity may apply. Please call 1300 210 910 for more information.

Add to cart
featured_image

900mm Length Reducers

Please see table for sizes available Custom sizes can be made to order. Minimum quantity may apply. Please call 1300 210 910 for more information. We also stock a 5″ to 4″ Reducer with a built-in slurry pot – RED-54-900-SP

Add to cart
featured_image

300mm Length Reducers

See table for sizes available 6″ to 5″ Reducer has PM Male/Victaulic Ends Custom sizes can be made to order. Minimum quantity may apply. Please call 1300 210 910 for more information.

Add to cart
featured_image

600mm Length Reducers

Please see table for available sizes Custom sizes can be made to order. Minimum quantity may apply. Please call 1300 210 910 for more information. We also stock a 5″ to 4″ Reducer with a built-in slurry pot – RED-54-600-SP

Add to cart
featured_image

Elbows with Slurry Pot

We have the following Elbows available with a Slurry Pot attached ELB-54-90D-300-SP – 5″ (127mm) x 90D Hopper Elbow with 5″ (127mm) to 4″ (102mm) x 300mm Reducer with Victaulic Ends with 4″ Victaulic Slurry Pot ELB-54-90D-RB-SP – 5″ (127mm) x 4″ (102mm) x 90D Reducing Short Radius Hopper Elbow with Victaulic Ends with 4″ […]

Add to cart
featured_image

Reducers with Slurry Pot

We currently have 3 Reducers available with a Slurry Pot Steel Reducer With Handle & Victaulic Ends-8mm Heavy Duty with 3″ Victaulic Slurry Pot RED-43-600-SP  –   4″ (102mm) to 3″ (76mm) x 600mm long Steel Reducer With Handle & Victaulic Ends-8mm Heavy Duty with 4″ Victaulic Slurry Pot RED-54-600-SP –    5″ (127mm)  to 4″ […]

Add to cart
featured_image

Slurry Cap with Welded Rod

Used to catch sponges when sucking concrete back into hopper

Add to cart
featured_image

Victaulic Slurry Cap

Used on T-Piece/Slurry Pot and on the end of a boom reducer

Add to cart
featured_image

900mm Length Reducers

Please see table for sizes available Custom sizes can be made to order. Minimum quantity may apply. Please call 1300 210 910 for more information. We also stock a 5″ to 4″ Reducer with a built-in slurry pot – RED-54-900-SP

Add to cart
featured_image

600mm Length Reducers

Please see table for available sizes Custom sizes can be made to order. Minimum quantity may apply. Please call 1300 210 910 for more information. We also stock a 5″ to 4″ Reducer with a built-in slurry pot – RED-54-600-SP

Add to cart
featured_image

Type A Claw Locking Pin – Triangle

Product Codes:

20pcs AWF-PIN-T-20
100pcs AWF-PIN-T-100
200pcs AWF-PIN-T-200

Add to cart
featured_image

Type A Fitting Rubber Seal

Product Codes:

12mm AWF-12-SEAL
19mm AWF-19-SEAL
25mm AWF-25-SEAL

Add to cart
featured_image

Type A Claw Locking Pin – R Type

Product Codes:

20pcs – AWF-PIN-R-20
100pcs AWF-PIN-R-100
200pcs AWF-PIN-R-200

Add to cart
featured_image

Type A – Air/Water Hose Repair Kit

12mm AWF-HRK-12
19mm AWF-HRK-19
25mm AWF-HRK-25

Add to cart
featured_image

Type A Bolt Clamp for LAH Fitting

12mm AWF-12-BOLT
19mm AWF-19-BOLT
25mm AWF-25-BOLT

Add to cart
featured_image

Type A Coupler x Male BSP Thread – Type LAM

12mm AWF-12-LAM
19mm AWF-19-LAM
25mm AWF-25-LAM

Add to cart
featured_image

Type A Coupler x Hosetail – Type LAF

12mm AWF-12-LAF
19mm AWF-19-LAF
25mm AWF-25-LAF

Add to cart
featured_image

Type A Coupler x Hosetail – Type LAH

PRODUCT CODES:

12mm AWF-12-LAH
19mm AWF-19-LAH
25mm AWF-25-LAH

Add to cart
featured_image

Wafer Butterfly Valve

Product Codes:

51mm BUTV-51
63mm BUTV-63
76mm BUTV-76
102mm BUTV-102
152mm BUTV-152

Add to cart
featured_image

Gate Valve with Female/Female BSP Thread

Product Codes:

25mm GVFF-25
38mm GVFF-38
51mm GVFF-51
76mm GVFF-76
102mm GVFF-102

Add to cart
featured_image

L Port Ball Valve with Female/Female BSP Thread

Product Codes:

12mm BVLP-FF-12
19mm BVLP-FF-19
25mm BVLP-FF-25
38mm BVLP-FF-38
51mm BVLP-FF-51

Add to cart
featured_image

T Port Ball Valve with Female/Female BSP Thread

12mm BVTP-FF-12
19mm BVTP-FF-19
25mm BVTP-FF-25
38mm BVTP-FF-38
51mm BVTP-FF-51

Add to cart
featured_image

Stainless Steel Ball Valve with Female/Female BSP Thread

Product Codes:

19mm BVFF-19-S
25mm BVFF-25-S
38mm BVFF-38-S
51mm BVFF-51-S

Add to cart
featured_image

Three Piece Full Port 316 Stainless Steel Ball Valve

Product Codes:

19mm BV3PC-FF-19
25mm BV3PC-FF-25
38mm BV3PC-FF-38
51mm BV3PC-FF-51

Add to cart
featured_image

Brass Ball Valve with Female/Female BSP Thread

Product Codes:

6mm BVFF-6
12mm BVFF-12
19mm BVFF-19
25mm BVFF-25
38mm BVFF-38
51mm BVFF-51
76mm BVFF-76
102mm BVFF-102

Add to cart
featured_image

Brass Ball Valve with Male/Female BSP Thread

12mm BVMF-12
19mm BVMF-19
25mm BVMF-25
38mm BVMF-38
51mm BVMF-51
76mm BVMF-76
102mm BVMF-102

Add to cart
featured_image

High Pressure Bolt Clamp Repair Kit

For use on Clamps CLP-HP-5-B and CLP-HP-6-B

Add to cart
featured_image

Wedge Clamp including Wedge Piece

High Pressure PM Clamp with Wedge Wedge piece also sold separately.

Add to cart
featured_image

3″ Clamp Rubber Gasket

Natural/Synthetic rubber blend Soft Compound – 20mm width – Great all-rounder used on cast and forged clamps -RG-3-S Medium Compound – 20mm width – Great all-rounder used on cast and forged clamps – RG-3-M Hard Compound – 20mm width – Used on forged clamps – RG-3-H

Add to cart
featured_image

2″ Clamp Rubber Gasket

Natural/Synthetic Rubber blend Soft Compound 20mm Width

Add to cart
featured_image

Allen Key 2-Bolt Machine Forged Victaulic Clamp

130 BAR working pressure with 2:1 safety factor. Comes with rubber gasket Great for connecting tremi pipes down a hole

Add to cart
featured_image

Single Bolt Machine Forged Victaulic Clamps

130 BAR working pressure with 2:1 safety factor Comes with rubber gasket

Add to cart
featured_image

Snap/Lever Machine Forged Victaulic Clamps

130 BAR working pressure with 2:1 safety factor Comes with wide shoulder rubber gasket, safety pin and warning label.

Add to cart
featured_image

Victaulic Allen Key 2-Bolt Clamp with Fixed Bracket

130 BAR working pressure with 2:1 safety factor Comes with rubber gasket. Great for securing steel pipes to concrete boom pumps or piling rigs

Add to cart
featured_image

Victaulic Single Bolt Clamp with Fixed Bracket

130 BAR working pressure with 2:1 safety factor. Comes with rubber gasket. Great for securing steel pipes to concrete boom pumps or piling rigs

Add to cart
featured_image

Victaulic Snap Clamp with Fixed Bracket

130 BAR working pressure with 2:1 safety factor. Comes with rubber gasket, safety pin and warning label Great for securing steel pipes to concrete boom pumps or piling rigs

Add to cart
featured_image

Allen Key 4-Bolt Victaulic Clamp

130 BAR working pressure with 2:1 safety factor Comes with rubber gasket

Add to cart
featured_image

Single Bolt Victaulic Clamps

130 BAR working pressure with 2:1 safety factor Comes with rubber gasket

Add to cart
featured_image

Allen Key 2-Bolt Victaulic Clamp

130 BAR working pressure with 2:1 safety factor. Comes with rubber gasket

Add to cart
featured_image

5″ Victaulic Galvanised Snap/Lever Clamp

130 BAR working pressure with a 2:1 safety factor. Comes with a rubber gasket, safety pin and warning label

Add to cart
featured_image

Snap/Lever Victaulic Clamps

130BAR working pressure with a 2:1 safety factor Comes with rubber gasket, safety pin and warning label

Add to cart
featured_image

Triangle Safety Pins

3mm Stainless Steel Shipped in a pack of 20 One size

Add to cart
featured_image

Boom Clamp Locking Pin 70mm

Shipped in a pack of 10 One Size

Add to cart
featured_image

Replacement Safety Pin/Label/Cord Set

4mm Stainless Steel Shipped in a pack of 10

Add to cart
featured_image

Safety Pins – R-Type with additional clip

4mm Stainless Steel Shipped in a pack of 20

Add to cart
featured_image

Safety Pins – 200mm R-Type Pins

Shipped in a pack of 5 One size only 200mm length

Add to cart
featured_image

Safety Pins for Victaulic Clamps – R Type

4mm Stainless Steel Ship in a pack of 20 Available in 95mm length and 120mm length

Add to cart
featured_image

Clear Poly Rubber Gasket

Heavy duty synthetic poly rubber blend

Add to cart
featured_image

7″ Clamp Rubber Gasket

Natural/Synthetic rubber blend

Add to cart
featured_image

6″ Clamp Rubber gasket

Natural/Synthetic rubber blend

Add to cart
featured_image

5″ Clamp Rubber Gasket with Lip

Natural/Synthetic rubber blend Great gasket for pivot elbows/bends

Add to cart
featured_image

5″ V-Type Clamp Rubber Gasket

Natural/Synthetic rubber blend Great gasket for pivot elbows/bends

Add to cart
featured_image

4″ Clamp Rubber Gasket

Natural/Synthetic rubber blend

Add to cart
featured_image

2″ O Ring and Washer Set

Replacement parts for a 2″ shotcrete spray gun. Set includes 2 x rubber O rings and 1 x steel washer  

Add to cart
featured_image

Grey Water Suction Hose

Product Information APPLICATION: EPFLEX Grey Water Suction Hose is a general purpose suction hose used in industrial, agricultural and Construction applications. Its high grade properties make it suitable to convey water, mud, light slurries, grain, sand and some chemicals. CONSTRUCTION TUBE: Grey PVC REINFORCEMENT: Rigid PVC helix TEMPERATURE: -5˚C to 60˚C

Add to cart
featured_image

10BAR Water Discharge Hose Assembly

Product Information APPLICATION: General purpose hose for use in heavy duty service for a wide range of applications CONSTRUCTION TUBE: NR / SBR Blended COVER: Black SBR / EPDM Blended; wrapped finish REINFORCEMENT: Synthetic fabric plies (2) TEMPERATURE: -20˚C to 70˚C

Add to cart
featured_image

Continental Water Discharge Hose only

Product Information APPLICATION: For use as a general purpose suction and discharge hose in medium to heavy-duty operations. CONSTRUCTION TUBE: Black PlioflexR synthetic rubber COVER: Black PlioflexR synthetic rubber (wrapped finish) REINFORCEMENT: Synthetic fabric plies with internal wire helix TEMPERATURE: -32˚C to 82˚C

Add to cart
featured_image

Clear PVC Water Suction Hose with Wire Braid – Hose only

Product Information APPLICATION: A versatile clear suction hose used in the conveyance of a wide range of food and beverage materials. The non-toxic formulation conforms with FDA requirements. CONSTRUCTION TUBE: Clear PVC COVER: Clear PVC REINFORCEMENT: Spring Wire TEMPERATURE: -7°C to 66°C

Add to cart
featured_image

Rubber Water Suction and Delivery Hose (10BAR/150psi)

Product Information APPLICATION: General purpose suction and discharge hose for use in medium to heavy duty operations. CONSTRUCTION TUBE: NR / SBR Blended COVER: Black SBR / EPDM Blended; wrapped finish REINFORCEMENT: Synthetic fabric plies (2) with wire helix TEMPERATURE: -20°C to 70°C

Add to cart

Sorry, there are no products Wear Parts right now

featured_image

Weldable Reducer

Various sizes available

Add to cart
featured_image

Weldable T-Piece

Various sizes available

Add to cart
featured_image

4″ Weldable Steel Bends

Korean Made 7mm thick Available in 45D and 90D Sizes 102mm Pipe I.D. – 4″ (7mm) Thickness

Add to cart
featured_image

Galvanised Stocking with Thimble on Each Eye for Concrete Hoses

Product Codes:

CAB-100130-TH 2″ Hose ID 100-130mm Size Range
CAB-130180-TH 4/5″ Hose ID 130-180mm Size Range
CAB-180210-TH 5″ Hose ID 180-210mm Size Range

CUSTOM SIZES AVAILABLE ON REQUEST

Add to cart
featured_image

2″/3″/4″/5″ Galvanised Steel Safety Whip Check for Concrete Hoses

Available in 2 sizes: 6mm ID – 2T Load Rating – 120cm length 10mm ID- 5T Load Rating – 105cm length

Add to cart
featured_image

CJ2 Cutting Teeth

For boring holes in extremely hard ground

Add to cart
featured_image

Python Concrete Hose Safety Cover

Python Hose Sleeve – Safety Cover for Concrete hose

Add to cart
featured_image

Python Hopper Sleeve Safety Cover – Boom Pump

Python Back Hopper Sleeve Safety Cover for Concrete Boom Pumps

Add to cart
featured_image

Wire Rope Bulldog Grip

Wire Rope Bulldog Grip Available in sizes from 8mm to 40mm

Add to cart
featured_image

Heavy Duty Duct Tape

Rubber Adhesive 0.13mm thickness 48mm x 30m 60 rolls per carton

Add to cart
featured_image

Zembrone Heavy Duty 2-piece Pile Cage Foot

Test certificates available on request

Add to cart
featured_image

Zembrone Yellow Safety Bar Cap 12-20mm

Test Certificate available on request Pack Quantity – 100 pieces Pallet Quantity – 50 packs

Add to cart
featured_image

6m Extension Drive Shaft

A 6m Extension Shaft to suit all 3 dog Drive Flex Drive pumps or Vibrator Shafts, 15mm inner core cable, 60kg.

Add to cart
featured_image

5.5hp Crommelins Diesel Drive Unit

This 5.5hp Diesel Drive Unit will drive 2″ (50mm) Submersible Flexible Drive Pumps and Concrete Vibrators (with 3 dog shafts). It comes complete with a heavy-duty roll frame to protect it from damage and is backed by Crommelins award winning spare parts and service. The Diesel model is also suitable for mine applications where petrol […]

Add to cart
featured_image

6.0hp Crommelins Petrol Drive Unit

This 6.0hp Drive Unit will drive 2″ (50mm) Submersible Flexible Drive Pumps such as Crommelins FP2T model and Concrete Vibrators (See Crommelins JV range). It comes complete with a heavy-duty roll frame to protect it from damage and is backed by Crommelins award winning spare parts and service. (Upgraded from 5.0hp to 6.0hp) Features – […]

Add to cart
featured_image

Portable Concrete Vibrator Shaft

The Crommelins take-anywhere 45mm Portable Vibrator that will do several jobs that previously could only be done by larger drive units and shafts. The portability and weight means that this unit is easy to use and saves dragging around heavy Drive Units and Vibrator Shafts. Ideal for footings, stairways and foot paths. Crommelins have also […]

Add to cart
featured_image

Concrete Vibrator Shaft 6M Length

Coming in 25, 28, 38, 45, 60mm Vibe shaft Sizes these attach to ‘3 dog’ shafts on Drive units. They are designed to remove bubbles on concrete pours. The shaft is easy to service, has a high quality inner and outer shell and is backed by Crommelins 12 Month manufacturer’s warranty. Features – 2 Piece […]

Add to cart
featured_image

Black Annealed Tie Wire

• 1.57mm x 94m • Shipped as 10 rolls per carton • 64 Cartons per pallet (640 rolls)

Add to cart
featured_image

Cage Splicing U-Bolts – Black Steel Finish

See details for Product Codes for each available size Test Certificate available on request

Add to cart
featured_image

Galvanised Stocking with Thimble on Each Eye for Concrete Hoses

Product Codes:

CAB-100130-TH 2″ Hose ID 100-130mm Size Range
CAB-130180-TH 4/5″ Hose ID 130-180mm Size Range
CAB-180210-TH 5″ Hose ID 180-210mm Size Range

CUSTOM SIZES AVAILABLE ON REQUEST

Add to cart
featured_image

2″/3″/4″/5″ Galvanised Steel Safety Whip Check for Concrete Hoses

Available in 2 sizes: 6mm ID – 2T Load Rating – 120cm length 10mm ID- 5T Load Rating – 105cm length

Add to cart
featured_image

BFZ158 Weld On Tungsten Teeth

Product Code: SH-BFZ158

34mm x 20mm

Box of 100

Add to cart
featured_image

Weldable Bar BA13

Product Code: CT-BA13

55mm x 45mm

Box of 70

Add to cart
featured_image

Pin for CJ2 Teeth

Supplied in a Box of 100

Add to cart
featured_image

Pin for Pilot Head

Fits sizes 19mm, 25mm and 30mm

Add to cart
featured_image

Galvanised Finish

Tested to Australian Standard AS 4100-1998 Please see below for product codes

Add to cart
featured_image

Zembrone Orange Reo Safety Bar Cap/Sock 24-36mm

Zembrone spacers are AS/NSZ 2425-2015 compliant please call for our test report

Add to cart
featured_image

Zembrone Yellow Heavy Duty Safety Bar Cap 12-20mm

Zembrone spacers are AS/NSZ 2425-2015 compliant please call for our test report

Add to cart
featured_image

Helix Spacer With Safety Clip

Please call for our test report

Add to cart
featured_image

Heavy Duty Spacer With Safety Clip

Product Codes:
50mm SPC-50
75mm SPC-75
85mm SPC-85
100mm SPC-100

TO ORDER PER PALLET, PLEASE ADD -P TO END OF PRODUCT CODE

Add to cart
featured_image

Bolt/Nut/Washer – Set of 2

Used with our hose repair half clamp

Add to cart
featured_image

Hose Repair Kit for Concrete Delivery Hose

Includes: -Hose Half Clamp with Bolt/Nut -Hardened Hose Tail with Victaulic End

Add to cart
featured_image

Lightweight Wire Braid Hose – 2″

Product Information APPLICATION: : PCS 85 BAR Wire Braided Concrete Hose is a heavy duty hose used for concrete placement applications in concrete structures, dams, tunnel faces etc. Ideal for use as a flexible connection between pumping equipment and hard piping. REINFORCEMENT: High-strength wire TEMPERATURE: -32˚C to 82˚C

Add to cart
featured_image

Allcrete Wire Hose Assemblies – 4″

Custom lengths available upon request Our 4” hoses are also available with a 4.5” Metric (Schwing) End to 4” Hose Tail. Please specify when ordering by adding -45 to any of the above PCS product codes. Example GYW-40-10D-45

Add to cart
featured_image

Allcrete Wire Hose Assemblies – 3.5″

Custom lengths available upon request Our 3.5” hoses are also available with the following fittings: 4” to 3.5” Non-Reducing Hose Tail. Please specify when ordering by adding a -NR to any of the above PCS product codes. Example GYW-35-10D-NR 4.5” Metric (Schwing) to 3.5” Reducing Hose Tail. Please specify when ordering by adding a -45 […]

Add to cart
featured_image

Allcrete Wire Hose Assemblies – 2.5″

Custom lengths available upon request Our 2.5” hoses are also available with a 3” to 2.5” Non-Reducing Hose Tail. Please specify when ordering by adding a -NR to any of the above PCS product codes. Example GYW-25-10D-NR

Add to cart
featured_image

Continental Allcrete Wire Hose only 2″ to 5″

Custom lengths available upon request Product Information APPLICATION: For handling wet concrete with high head pressures at the critical flex areas of a concrete boom truck and as a discharge hose on the delivery end of high-pressure concrete pumps. Exceeds ASME B30.27-2009. 2:1 WP to burst ratio CONSTRUCTION TUBE: Black TufsynR synthetic rubber COVER: Black […]

Add to cart
featured_image

Continental G820 Fabric Hose Assemblies – 4″

Custom lengths available upon request Our 4” hoses are also available with a 4.5” Metric (Schwing) End to 4” Hose Tail. Please specify when ordering by adding a -45 to any of the above PCS product codes. Example G820-40-10D-45

Add to cart
featured_image

Continental G820 Fabric Hose Assemblies – 3.5″

Custom lengths available upon request Our 3.5” hoses are also available with following fittings: 4” to 3.5” Non-Reducing Hose Tail. Please specify when ordering by adding a -NR to any of the above PCS product codes. Example G820-35-10D-NR 4.5” Metric (Schwing) to 3.5” Reducing Hose Tail. Please specify when ordering by adding a -45 to […]

Add to cart
featured_image

Continental G820 Fabric Hose Assemblies – 2.5″

Custom lengths available upon request Our 2.5” hoses are also available with a 3” to 2.5” Non-Reducing Hose Tail. Please specify when ordering by adding a -NR to any of the above PCS product codes. Example G820-25-10D-NR

Add to cart
featured_image

Continental G820 Fabric Hose only – 2″ – 4″

Custom lengths available upon request Product Information APPLICATION: Goodyear’s G820 Super Concrete Delivery is a premium quality hose for heavy duty/high pressure concrete placement applications in concrete structures, dams, tunnel faces etc. Ideal for use as a flexible connection between pumping equipment and hard piping. CONSTRUCTION TUBE: 6.4mm Black TufsynR SyntheticR Rubber COVER: 2.4mm Black […]

Add to cart
featured_image

Continental Allcrete Fabric Hose Assemblies-4″

Custom lengths available on request Our 4” hoses are also available with a 4.5” Metric (Schwing) End to 4” Hose Tail. Please specify when ordering by adding a -45 to any of the above PCS product codes. Example GA-40-10D-45

Add to cart
featured_image

Continental Allcrete Fabric Hose Assemblies-3.5″

Custom lengths available on request Our 3.5” hoses are also available with: 4” to 3.5” Non-Reducing Hose Tail. Please specify when ordering by adding a -NR to any of the above PCS product codes. Example GA-35-10D-NR 4.5” Metric (Schwing) to 3.5” Reducing Hose Tail. Please specify when ordering by adding a -45 to any of […]

Add to cart
featured_image

Continental Allcrete Fabric Hose Assemblies-2.5″

Custom Lengths available on request Our 2.5” hoses are also available with a 3” to 2.5” Non-Reducing Hose Tail. Please specify when ordering by adding a -NR to any of the above PCS product codes. Example GA-25-10D-NR

Add to cart
featured_image

Continental Allcrete Fabric Hose Assemblies-2″

Custom sizes available on request Our 2.5” hoses are also available with a 3” to 2.5” Non-Reducing Hose Tail. Please specify when ordering by adding a -NR to any of the above PCS product codes. Example GA-25-10D-NR

Add to cart
featured_image

Continental Allcrete Fabric Hose only 2″ to 4″

Custom lengths available upon request Product Information APPLICATION: For use in plaster & grout and shotcrete applications, handling a multitude of materials being pumped to concrete structures, dams, tunnel faces, swimming pools, etc. For use as a flexible connection between pumping equipment and hard piping. Exceeds ASME B30.27-2009. 2:1 WP to burst ratio CONSTRUCTION TUBE: […]

Add to cart
featured_image

Set of 2 Bolt/Nut/Washer

Used with our hose repair half clamp

Add to cart
featured_image

Hose Repair Kit for concrete Delivery Hose

Includes: Hose half clamp with Bolt/Nut Hardened Hose Tail with Victaulic End

Add to cart
featured_image

Extended Length Concrete Hose Ferrule

Extended length steel ferrule for concrete hose tails

Add to cart
featured_image

Standard Length Concrete Hose Ferrule

Steel Ferrule for concrete hose tails

Add to cart
featured_image

Non Reducing Concrete Hose Tail and Ferrule Set

Non-Reducing type Hardened reducing victaulic end x hose tail with Ferrule set

Add to cart
featured_image

Reducing Concrete Hose Tail and Ferrule Set

Reducing type Hardened Reducing Victaulic End x Hose Tail with Ferrule set

Add to cart
featured_image

Extended Length Concrete Hose Fitting

Extended length hose tail x Victaulic end

Add to cart
featured_image

Reducing Concrete Hose Fitting

Hardened Hose Tail x Victaulic end

Add to cart
featured_image

Non-Reducing Concrete Hose Fitting

Hardened Hose Tail x Victaulic End

Add to cart
featured_image

Standard Concrete Hose Fitting

Hardened Hose tail x Victualic end

Add to cart
featured_image

Galvanised Stocking with Thimble on Each Eye for Concrete Hoses

Product Codes:

CAB-100130-TH 2″ Hose ID 100-130mm Size Range
CAB-130180-TH 4/5″ Hose ID 130-180mm Size Range
CAB-180210-TH 5″ Hose ID 180-210mm Size Range

CUSTOM SIZES AVAILABLE ON REQUEST

Add to cart
featured_image

2″/3″/4″/5″ Galvanised Steel Safety Whip Check for Concrete Hoses

Available in 2 sizes: 6mm ID – 2T Load Rating – 120cm length 10mm ID- 5T Load Rating – 105cm length

Add to cart
featured_image

Lifting Lugs – 5 T – Weldable

Weld On lifting lugs Capacity: 5 Tonne Can be welded on any carbon steel surface as a lifting point or to be used as a fixed anchor point for spreader beam attachment or load restraint applications Available in 2 Pack

Add to cart
featured_image

Lifting Lugs – 3 T – Weldable

Weld On lifting lugs Capacity: 3 Tonne Can be welded on any carbon steel surface as a lifting point or to be used as a fixed anchor point for spreader beam attachment or load restraint applications Available in 2 Pack

Add to cart
featured_image

Lifting Lugs – 1 T – Weldable

Weld On lifting lugs Capacity: 1 Tonne Can be welded on any carbon steel surface as a lifting point or to be used as a fixed anchor point for spreader beam attachment or load restraint applications Available in 2 Pack

Add to cart
featured_image

Shut Off Valve – Hand Operated

Available in 4″ (102mm) and 5″ (127mm)   Concrete Hand Operated Hydraulic Shut Off Bullet Valve with T Piece and Clamp included

Add to cart
featured_image

Blockfill Elbow 2″ x 180D

2″ (51mm) x 180D Block Fill Elbow with ends and handle

Add to cart
featured_image

Reducers with Lifting Lugs – 2″ to 2.5″

We have the following sizes in Steel Reducers that are fitted with 2 x 2T Lifting Lugs. 2.5 – 2″ x 600mm  – RED-252-600-LG 2.5 – 2″ x  900mm – RED-252-900-LG      

Add to cart
featured_image

Blow Out Cap with Stainless Steel Fittings – Two Stage

Two Stage Blow Out Cap – 3″ and 4″ Victaulic End Blow out Cap with 19mm Air/Water Fitting – Stainless steel nipples and t-piece – Brass ball valve – Great for blowing out certain sections of your line  

Add to cart
featured_image

Reducers with Lifting Lugs – 6″

Concrete Pump 8mm Heavy Duty Steel Reducer With Handle & Victaulic Ends including 2 x Lifting Lugs 6″ to 4″ x 900mm – RED-64-900-LG            

Add to cart
featured_image

Reducers with Lifting Lugs – 5″

Concrete Pump 8mm Heavy Duty Steel Reducer With Handle & Victaulic Ends including 2 x Lifting Lugs Lifting Lugs are 2 x 1T for 300mm. All other sizes have 2 x 2T Lifting Lugs. 5″ to 3″ x 600mm – RED-53-600-LG 5″ to 3″ x 900mm – RED-53-900-LG 5″ to 3.5″ x 600mm – RED-535-600-LG […]

Add to cart
featured_image

Reducers with Lifting Lugs – 4″ Non-Reducing

Concrete Pump 8mm Heavy Duty Non Reducing Steel Reducer With Handle & Victaulic Ends with lifting lugs 4.5″ to 3.5″ x 600mm – RED-4535-600-NR-LG 4.5″ to 3.5″ x 900mm – RED-4535-900-NR-LG                

Add to cart
featured_image

Reducers with Lifting Lugs – 4″

Concrete Pump 8mm Heavy Duty Steel Reducer With Handle & Victaulic Ends including 2 x  Lifting Lugs Lifting Lugs are 2 x 1T for 300mm. All other sizes have 2 x 2T Lifting Lugs.   4″ to 2″ x 600mm – RED-42-600-LG 4″ to 2″ x 900mm – RED-42-900-LG 4″ to 2″ x 1200mm – […]

Add to cart
featured_image

Reducers with Lifting Lugs – 3″

Concrete Pump 8mm Heavy Duty Steel Reducer With Handle & Victaulic Ends including 2 x Lifting Lugs   Lifting Lugs are 2 x 1T for 300mm. All other sizes have 2 x 2T Lifting Lugs.   3″ to 2″ x 300mm  – RED-32-300-LG 3″ to 2″ x 600mm – RED-32-600-LG 3″ to 2″ x 900mm […]

Add to cart
featured_image

Python Hopper Sleeve Safety Cover – Line Pump

Python Back Hopper Sleeve Safety Cover for Concrete Line Pumps Click on video link below to see this in operation

Add to cart
featured_image

Lifting Lugs – 2 T – Weldable

Weld On lifting lugs Capacity: 2 Tonne Can be welded on any carbon steel surface as a lifting point or to be used as a fixed anchor point for spreader beam attachment or load restraint applications Available in 2 Pack, 4 Pack and 10 Pack

Add to cart
featured_image

High Pressure Bolt Clamp Repair Kit

For use on Clamps CLP-HP-5-B and CLP-HP-6-B

Add to cart
featured_image

Wedge Clamp including Wedge Piece

High Pressure PM Clamp with Wedge Wedge piece also sold separately.

Add to cart
featured_image

3″ Clamp Rubber Gasket

Natural/Synthetic rubber blend Soft Compound – 20mm width – Great all-rounder used on cast and forged clamps -RG-3-S Medium Compound – 20mm width – Great all-rounder used on cast and forged clamps – RG-3-M Hard Compound – 20mm width – Used on forged clamps – RG-3-H

Add to cart
featured_image

2″ Clamp Rubber Gasket

Natural/Synthetic Rubber blend Soft Compound 20mm Width

Add to cart
featured_image

Allen Key 2-Bolt Machine Forged Victaulic Clamp

130 BAR working pressure with 2:1 safety factor. Comes with rubber gasket Great for connecting tremi pipes down a hole

Add to cart
featured_image

Single Bolt Machine Forged Victaulic Clamps

130 BAR working pressure with 2:1 safety factor Comes with rubber gasket

Add to cart
featured_image

Snap/Lever Machine Forged Victaulic Clamps

130 BAR working pressure with 2:1 safety factor Comes with wide shoulder rubber gasket, safety pin and warning label.

Add to cart
featured_image

Victaulic Allen Key 2-Bolt Clamp with Fixed Bracket

130 BAR working pressure with 2:1 safety factor Comes with rubber gasket. Great for securing steel pipes to concrete boom pumps or piling rigs

Add to cart
featured_image

Victaulic Single Bolt Clamp with Fixed Bracket

130 BAR working pressure with 2:1 safety factor. Comes with rubber gasket. Great for securing steel pipes to concrete boom pumps or piling rigs

Add to cart
featured_image

Victaulic Snap Clamp with Fixed Bracket

130 BAR working pressure with 2:1 safety factor. Comes with rubber gasket, safety pin and warning label Great for securing steel pipes to concrete boom pumps or piling rigs

Add to cart
featured_image

Allen Key 4-Bolt Victaulic Clamp

130 BAR working pressure with 2:1 safety factor Comes with rubber gasket

Add to cart
featured_image

Single Bolt Victaulic Clamps

130 BAR working pressure with 2:1 safety factor Comes with rubber gasket

Add to cart
featured_image

Allen Key 2-Bolt Victaulic Clamp

130 BAR working pressure with 2:1 safety factor. Comes with rubber gasket

Add to cart
featured_image

5″ Victaulic Galvanised Snap/Lever Clamp

130 BAR working pressure with a 2:1 safety factor. Comes with a rubber gasket, safety pin and warning label

Add to cart
featured_image

Snap/Lever Victaulic Clamps

130BAR working pressure with a 2:1 safety factor Comes with rubber gasket, safety pin and warning label

Add to cart
featured_image

Elbows with Slurry Pot

We have the following Elbows available with a Slurry Pot attached ELB-54-90D-300-SP – 5″ (127mm) x 90D Hopper Elbow with 5″ (127mm) to 4″ (102mm) x 300mm Reducer with Victaulic Ends with 4″ Victaulic Slurry Pot ELB-54-90D-RB-SP – 5″ (127mm) x 4″ (102mm) x 90D Reducing Short Radius Hopper Elbow with Victaulic Ends with 4″ […]

Add to cart
featured_image

Reducers with Slurry Pot

We currently have 3 Reducers available with a Slurry Pot Steel Reducer With Handle & Victaulic Ends-8mm Heavy Duty with 3″ Victaulic Slurry Pot RED-43-600-SP  –   4″ (102mm) to 3″ (76mm) x 600mm long Steel Reducer With Handle & Victaulic Ends-8mm Heavy Duty with 4″ Victaulic Slurry Pot RED-54-600-SP –    5″ (127mm)  to 4″ […]

Add to cart
featured_image

Python Concrete Hose Safety Cover

Python Hose Sleeve – Safety Cover for Concrete hose

Add to cart
featured_image

Python Hopper Sleeve Safety Cover – Boom Pump

Python Back Hopper Sleeve Safety Cover for Concrete Boom Pumps

Add to cart
featured_image

High Pressure Putzmeister Female Blow Out Cap 6″ – XL

Female PM (Z Type) Blow Out Cap with 19mm Type A fitting and 38mm Release Valve

Add to cart
featured_image

5″ x R240 High-Manganese Cast Boom Elbows with Victaulic Ends-30D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown  

Add to cart
featured_image

4″ Weldable Steel Bends

Korean Made 7mm thick Available in 45D and 90D sizes.

Add to cart
featured_image

PM(ZX) Blow Out Canon 6″

6″ Female PM blow out cannon with 38mm release valve, 19mm water fitting, pressure gauge and handle

Add to cart
featured_image

Grease Cartridge

Cartridge of Black Tac Gulf Western Grease Available per cartridge or per box of 12 units.

Add to cart
featured_image

Concrete Pipe 180D Elbow

Available in 3″, 4″ and 5″ 3″ (76mm) x 180D Elbow with 2 Victaulic Ends,Handle & Lifting Lugs 4″ (102mm) x 180D Elbow with 2 Victaulic Ends, Handle & Lifting Lugs 5″ (127mm) x 180D Elbow with 2 Victaulic Ends, Handle & Lifting Lugs

Add to cart
featured_image

Concrete Primer Satchel – 300gm

Single Use Concrete Primer Satchel. 300gm – CP-Sat-300 Available separately or in a box of 50 satchels – CP-Sat-300-B

Add to cart
featured_image

Concrete Hose Stand – Fixed – Replacement Roller

Replacement roller only for Fixed Concrete Hose Stand  

Add to cart
featured_image

Triangle Safety Pins

3mm Stainless Steel Shipped in a pack of 20 One size

Add to cart
featured_image

Boom Clamp Locking Pin 70mm

Shipped in a pack of 10 One Size

Add to cart
featured_image

Replacement Safety Pin/Label/Cord Set

4mm Stainless Steel Shipped in a pack of 10

Add to cart
featured_image

Safety Pins – R-Type with additional clip

4mm Stainless Steel Shipped in a pack of 20

Add to cart
featured_image

Safety Pins – 200mm R-Type Pins

Shipped in a pack of 5 One size only 200mm length

Add to cart
featured_image

Safety Pins for Victaulic Clamps – R Type

4mm Stainless Steel Ship in a pack of 20 Available in 95mm length and 120mm length

Add to cart
featured_image

Heavy Duty Duct Tape

Rubber Adhesive 0.13mm thickness 48mm x 30m 60 rolls per carton

Add to cart
featured_image

Concrete Pump Safety Sign

Measures 21cm x 60cm x 30cm

Add to cart
featured_image

High Pressure Putzmeister Male/Female Butt Weld Ends

PLEASE NOTE: THESE ENDS SHIP AS A MALE/FEMALE SET

Add to cart
featured_image

Bolt/Nut/Washer – Set of 2

Used with our hose repair half clamp

Add to cart
featured_image

Hose Repair Kit for Concrete Delivery Hose

Includes: -Hose Half Clamp with Bolt/Nut -Hardened Hose Tail with Victaulic End

Add to cart
featured_image

Lightweight Wire Braid Hose – 2″

Product Information APPLICATION: : PCS 85 BAR Wire Braided Concrete Hose is a heavy duty hose used for concrete placement applications in concrete structures, dams, tunnel faces etc. Ideal for use as a flexible connection between pumping equipment and hard piping. REINFORCEMENT: High-strength wire TEMPERATURE: -32˚C to 82˚C

Add to cart
featured_image

Allcrete Wire Hose Assemblies – 4″

Custom lengths available upon request Our 4” hoses are also available with a 4.5” Metric (Schwing) End to 4” Hose Tail. Please specify when ordering by adding -45 to any of the above PCS product codes. Example GYW-40-10D-45

Add to cart
featured_image

Allcrete Wire Hose Assemblies – 3.5″

Custom lengths available upon request Our 3.5” hoses are also available with the following fittings: 4” to 3.5” Non-Reducing Hose Tail. Please specify when ordering by adding a -NR to any of the above PCS product codes. Example GYW-35-10D-NR 4.5” Metric (Schwing) to 3.5” Reducing Hose Tail. Please specify when ordering by adding a -45 […]

Add to cart
featured_image

Allcrete Wire Hose Assemblies – 2.5″

Custom lengths available upon request Our 2.5” hoses are also available with a 3” to 2.5” Non-Reducing Hose Tail. Please specify when ordering by adding a -NR to any of the above PCS product codes. Example GYW-25-10D-NR

Add to cart
featured_image

Continental Allcrete Wire Hose only 2″ to 5″

Custom lengths available upon request Product Information APPLICATION: For handling wet concrete with high head pressures at the critical flex areas of a concrete boom truck and as a discharge hose on the delivery end of high-pressure concrete pumps. Exceeds ASME B30.27-2009. 2:1 WP to burst ratio CONSTRUCTION TUBE: Black TufsynR synthetic rubber COVER: Black […]

Add to cart
featured_image

Continental G820 Fabric Hose Assemblies – 4″

Custom lengths available upon request Our 4” hoses are also available with a 4.5” Metric (Schwing) End to 4” Hose Tail. Please specify when ordering by adding a -45 to any of the above PCS product codes. Example G820-40-10D-45

Add to cart
featured_image

Continental G820 Fabric Hose Assemblies – 3.5″

Custom lengths available upon request Our 3.5” hoses are also available with following fittings: 4” to 3.5” Non-Reducing Hose Tail. Please specify when ordering by adding a -NR to any of the above PCS product codes. Example G820-35-10D-NR 4.5” Metric (Schwing) to 3.5” Reducing Hose Tail. Please specify when ordering by adding a -45 to […]

Add to cart
featured_image

Continental G820 Fabric Hose Assemblies – 2.5″

Custom lengths available upon request Our 2.5” hoses are also available with a 3” to 2.5” Non-Reducing Hose Tail. Please specify when ordering by adding a -NR to any of the above PCS product codes. Example G820-25-10D-NR

Add to cart
featured_image

Continental G820 Fabric Hose only – 2″ – 4″

Custom lengths available upon request Product Information APPLICATION: Goodyear’s G820 Super Concrete Delivery is a premium quality hose for heavy duty/high pressure concrete placement applications in concrete structures, dams, tunnel faces etc. Ideal for use as a flexible connection between pumping equipment and hard piping. CONSTRUCTION TUBE: 6.4mm Black TufsynR SyntheticR Rubber COVER: 2.4mm Black […]

Add to cart
featured_image

Continental Allcrete Fabric Hose Assemblies-4″

Custom lengths available on request Our 4” hoses are also available with a 4.5” Metric (Schwing) End to 4” Hose Tail. Please specify when ordering by adding a -45 to any of the above PCS product codes. Example GA-40-10D-45

Add to cart
featured_image

Continental Allcrete Fabric Hose Assemblies-3.5″

Custom lengths available on request Our 3.5” hoses are also available with: 4” to 3.5” Non-Reducing Hose Tail. Please specify when ordering by adding a -NR to any of the above PCS product codes. Example GA-35-10D-NR 4.5” Metric (Schwing) to 3.5” Reducing Hose Tail. Please specify when ordering by adding a -45 to any of […]

Add to cart
featured_image

Continental Allcrete Fabric Hose Assemblies-2.5″

Custom Lengths available on request Our 2.5” hoses are also available with a 3” to 2.5” Non-Reducing Hose Tail. Please specify when ordering by adding a -NR to any of the above PCS product codes. Example GA-25-10D-NR

Add to cart
featured_image

Continental Allcrete Fabric Hose Assemblies-2″

Custom sizes available on request Our 2.5” hoses are also available with a 3” to 2.5” Non-Reducing Hose Tail. Please specify when ordering by adding a -NR to any of the above PCS product codes. Example GA-25-10D-NR

Add to cart
featured_image

Continental Allcrete Fabric Hose only 2″ to 4″

Custom lengths available upon request Product Information APPLICATION: For use in plaster & grout and shotcrete applications, handling a multitude of materials being pumped to concrete structures, dams, tunnel faces, swimming pools, etc. For use as a flexible connection between pumping equipment and hard piping. Exceeds ASME B30.27-2009. 2:1 WP to burst ratio CONSTRUCTION TUBE: […]

Add to cart
featured_image

Water Pump and Drive Unit

Pump is a very popular heavy duty 50mm (2”) industrial pump with large 15mm core dry cable which provides wider access and easier flow. It is made with cast iron casing with wide passages to allow debris (up to 25mm) to pass through and can allow fluids containing up to 60% solids. The main shaft […]

Add to cart
featured_image

Soft Leather Rigger Gloves

Good quality full-grain unlined cowhide glove
Field of application: All-round work glove for environments and situations where leather gloves are required

Available in Large and Extra-Large

12 pairs per pack
144 pairs per box

 

Add to cart
featured_image

Slurry Cap with Welded Rod

Used to catch sponges when sucking concrete back into hopper

Add to cart
featured_image

Victaulic Slurry Cap

Used on T-Piece/Slurry Pot and on the end of a boom reducer

Add to cart
featured_image

Wall Bracket with Double U-Bolt

Used for static lines placed up against a wall   Static line concrete pipe brackets Base plate size 200mm x 240mm with 22mm holes M18 threaded U-Bolt Bracket allows for 125mm clearance between ground and the pipe 150mm clearance brackets are available with lead-time of 10-12 weeks

Add to cart
featured_image

Floor Bracket with Single U-Bolt

Used for static lines being run along the ground   Static line concrete pipe brackets Base plate size 200mm x 240mm with 22mm holes M18 threaded U-Bolt Bracket allows for 125mm clearance between ground and the pipe 150mm clearance brackets are available with lead-time of 10-12 weeks

Add to cart
featured_image

U-Bolt

Used for securing pipes to the ground/wall where a floor/wall bracket cannot be used

Add to cart
featured_image

U-Bolt with Weldable Base Plate

Used for securing pipes to the ground/wall where a floor/wall bracket cannot be used. Available in 4″ – UB-4-B and 5″ – UB-5-B Also available with a rubber coating on the U-Bolt – UB-5-B-R

Add to cart
featured_image

Black Nitrile Gloves

Seamless knitted black nylon liner with knitted, elasticated cuffs.
Nitrile coating to palms and fingertips, provides excellent dexterity with precise grip
Added surface to provide extra grip during application

Available in Large GLV-N-L and Extra Large GLV-N-XL

Available in packs of 12 pairs or box of 144 pairs

Add to cart
featured_image

1200mm Length Reducers

Please see table for sizes available Custom sizes can be made to order. Minimum quantity may apply. Please call 1300 210 910 for more information.

Add to cart
featured_image

900mm Length Reducers

Please see table for sizes available Custom sizes can be made to order. Minimum quantity may apply. Please call 1300 210 910 for more information. We also stock a 5″ to 4″ Reducer with a built-in slurry pot – RED-54-900-SP

Add to cart
featured_image

300mm Length Reducers

See table for sizes available 6″ to 5″ Reducer has PM Male/Victaulic Ends Custom sizes can be made to order. Minimum quantity may apply. Please call 1300 210 910 for more information.

Add to cart
featured_image

600mm Length Reducers

Please see table for available sizes Custom sizes can be made to order. Minimum quantity may apply. Please call 1300 210 910 for more information. We also stock a 5″ to 4″ Reducer with a built-in slurry pot – RED-54-600-SP

Add to cart
featured_image

6m Extension Drive Shaft

A 6m Extension Shaft to suit all 3 dog Drive Flex Drive pumps or Vibrator Shafts, 15mm inner core cable, 60kg.

Add to cart
featured_image

5.5hp Crommelins Diesel Drive Unit

This 5.5hp Diesel Drive Unit will drive 2″ (50mm) Submersible Flexible Drive Pumps and Concrete Vibrators (with 3 dog shafts). It comes complete with a heavy-duty roll frame to protect it from damage and is backed by Crommelins award winning spare parts and service. The Diesel model is also suitable for mine applications where petrol […]

Add to cart
featured_image

6.0hp Crommelins Petrol Drive Unit

This 6.0hp Drive Unit will drive 2″ (50mm) Submersible Flexible Drive Pumps such as Crommelins FP2T model and Concrete Vibrators (See Crommelins JV range). It comes complete with a heavy-duty roll frame to protect it from damage and is backed by Crommelins award winning spare parts and service. (Upgraded from 5.0hp to 6.0hp) Features – […]

Add to cart
featured_image

Portable Concrete Vibrator Shaft

The Crommelins take-anywhere 45mm Portable Vibrator that will do several jobs that previously could only be done by larger drive units and shafts. The portability and weight means that this unit is easy to use and saves dragging around heavy Drive Units and Vibrator Shafts. Ideal for footings, stairways and foot paths. Crommelins have also […]

Add to cart
featured_image

Concrete Vibrator Shaft 6M Length

Coming in 25, 28, 38, 45, 60mm Vibe shaft Sizes these attach to ‘3 dog’ shafts on Drive units. They are designed to remove bubbles on concrete pours. The shaft is easy to service, has a high quality inner and outer shell and is backed by Crommelins 12 Month manufacturer’s warranty. Features – 2 Piece […]

Add to cart
featured_image

Weldable Reducer

Various sizes available

Add to cart
featured_image

Weldable T-Piece

Various sizes available

Add to cart
featured_image

Black Annealed Tie Wire

• 1.57mm x 94m • Shipped as 10 rolls per carton • 64 Cartons per pallet (640 rolls)

Add to cart
featured_image

Disc Cutting Blades

All sizes come in packs of 50

Add to cart
featured_image

SuperLube 100™ Concrete Primer

SuperLube 100™ is a state-of-the-art liquid concrete pump primer uniquely formulated to provide the concrete contractor with a cost-effective replacement for premium priced grout, primer slurries or bagged cement primers. It is environmentally safe and compatible with all concrete materials and contains no bentonite, cementitious materials, soaps or air entraining agents. Advantages: – Liquid mixes […]

Add to cart
featured_image

Double Sided Spanner – Various Sizes

– For use with all victaulic bolt clamps – Extra length to assist with loosening high pressure bolt clamps – Please call for availability of other sizes –

Add to cart
featured_image

Clear Poly Rubber Gasket

Heavy duty synthetic poly rubber blend

Add to cart
featured_image

7″ Clamp Rubber Gasket

Natural/Synthetic rubber blend

Add to cart
featured_image

6″ Clamp Rubber gasket

Natural/Synthetic rubber blend

Add to cart
featured_image

5″ Clamp Rubber Gasket with Lip

Natural/Synthetic rubber blend Great gasket for pivot elbows/bends

Add to cart
featured_image

5″ V-Type Clamp Rubber Gasket

Natural/Synthetic rubber blend Great gasket for pivot elbows/bends

Add to cart
featured_image

4″ Clamp Rubber Gasket

Natural/Synthetic rubber blend

Add to cart
featured_image

Wurth 1L Diesel Sprayer

Genuine Wurth Vacuum Pump Bottle with Viton seals for longer lasting use. Dispenses many chemical types including Diesel, Brake Cleaner, Degreasers. The 1 litre capacity bottle unscrews from the pump for easy filling. Adjustable spray nozzle for mist or jet. Durable plastic bottle.

Add to cart
featured_image

00 Truck Grease

Comes in a 15kg tub (18.7L)

Add to cart
featured_image

Concrete Pump Logbook

– 12 monthly logbook required for ALL concrete pumps

Add to cart
featured_image

Concrete Pump Remote Control

Genuine Elsema Gigalink 4 Channel Remote Replacement Plastic cover also available – REM-4CH-C

Add to cart
featured_image

Ultrasonic Thickness Tester

– Great for your monthly pipe tests as required in the concrete pump logbook – Simply put some clear liquid soap on the pipe, place probe on the soap and a digital reading is given. – Steel pipe measuring range from 1.2mm to 225mm – Auto calibration – Size 133mm x 70mm x 36mm. Weight […]

Add to cart
featured_image

24V Concrete Pump Hopper Vibrator

– Our special bolt hole patterns are designed to be compatible with all existing brands. Just use the existing mounting plate. It’s that easy. – Our hopper is commonly used on Junjin, Concord, Putzmeister, Schwing, Reed and many more – Includes easy to read instruction manual for installation ALSO AVAILABLE IN 12V – PLEASE CONTACT […]

Add to cart
featured_image

Concrete Boom Pump Outrigger Foot Pads

Made with heavy duty polyethylene material and includes a rope handle for easy lifting Available Sizes: Footpad Size Groove Diameter Load Capacity PCS Product Code 500mm x 500mm x 50mm (Thickness) 400mm 35T FP-500-400 600mm x 600mm x 60mm (Thickness) 400mm 45T FP-600-400

Add to cart
featured_image

Concrete Boom Drop Hose Clamp

**WARNING** – Drop Hose Clamp must be removed from hose before operating Concrete Pump !!

Add to cart
featured_image

Concrete Hose Placement Ring

Great for controlling direction of concrete flow out of a delivery/lead hose Available in sizes to suit 2.5″, 3″ 3.5″ and 4″ – 60cm Handle Width and 90cm Handle height Available in sizes to suit 3.5″ and 4″ with extended handle width 75cm and 105cm handle height (XL)

Add to cart
featured_image

Concrete Hose Hook

– Great for repositioning concrete hoses during use – Can be used on all sizes of concrete hoses

Add to cart
featured_image

Concrete Remover

Con-Clean Concrete Remover – Dry lubricant derived from Molybdenum disulphide allowing for application in high temperatures – Safely remove concrete/cement from trucks and tools. Apply with broom or spray. Allow up to 20minutes dwell time. Remove concrete with pressure washer – Safely removes concrete/cement from aluminium windows and glass. E.g. Industrial Clean ups. Will not […]

Add to cart
featured_image

Victaulic Blow Out Canon with Fittings

Great when using a square/cylinder sponge, water then a sponge ball to blow out 2 sizes in stock Other sizes can be made on request

Add to cart
featured_image

High Pressure Putzmeister Female Blow Out Cap 6″

Female PM Blow Out Cap with 19mm Air/Water Fittings-Stainless Steel Also available in XL with a 38mm release valve.

Add to cart
featured_image

Victaulic Blow Out Cap – Single

Available in various sizes Also available with Butterfly Handle – BH added to product code.

Add to cart
featured_image

Blow Out Cap with Stainless Steel Fittings – Two Stage

Two Stage Victaulic Blow Out Cap – Victaulic End Blow out Cap with 19mm Air/Water Fitting – Stainless steel nipples and t-piece – Brass ball valve – Great for blowing out certain sections of your line Also available with Butterfly Handle – BH added to product code

Add to cart
featured_image

Blow Out Cap with Stainless Steel Fittings – Three Stage

Three Stage Blow Out Cap – 2″/3″/4″ Victaulic End Blow out Cap with 19mm Air/Water Fitting – Stainless steel nipples and t-piece – Brass ball valve – Great for blowing out certain sections of your line Also available with Butterfly Handle: Add -BH to our Product code. Eg: BOC-432-BH

Add to cart
featured_image

Budget Sponge Balls – Hard

Great for line hands who always lose sponge balls

Add to cart
featured_image

Budget Sponge Balls – Medium

Great for line hands who always lose sponge balls

Add to cart
featured_image

Budget Sponge Balls – Soft

Orange Sponge balls – great for line hands who always lose sponge balls !

Add to cart
featured_image

5″ Weldable Static Line Bends

Korean made 7mm thick bend, great for customising bends to suit your project needs. 5″ (127mm) Pipe I.D

Add to cart
featured_image

5″ Static Line Bends with Putzmeister Male/Female High Pressure Ends – 90D Elbow

– Korean made long radius bends great for setting up static lines – Painted in 2 Pac white colour. – A length to be measured as shown 5″ Pipe I.D. – 7mm Thickness

Add to cart
featured_image

5″ Static Line Bends with Putzmeister Male/Female High Pressure Ends – 45D Elbow

– Korean made long radius bends great for setting up static lines – Painted in 2 Pac white colour. – A length to be measured as shown 5″ Pipe I.D. – 7mm Thickness

Add to cart
featured_image

5″ Static Line Bends with Putzmeister Male/Female High Pressure Ends – 22D Elbow

– Korean made long radius bends great for setting up static lines – Painted in 2 Pac white colour. – A length to be measured as shown 5″ Pipe I.D. – 7mm Thickness

Add to cart
featured_image

4″ Weldable Steel Bends

Korean Made 7mm thick Available in 45D and 90D Sizes 102mm Pipe I.D. – 4″ (7mm) Thickness

Add to cart
featured_image

5″ Twin Wall Boom Elbows with Welded on Hardened Victaulic Ends -90D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown 5″ Pipe I.D. – 7mm Thickness

Add to cart
featured_image

5″ Twin Wall Boom Elbows with Welded on Hardened Victaulic Ends -45D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown 5″ Pipe I.D. – 7mm Thickness

Add to cart
featured_image

5″ Twin Wall Boom Elbows with Welded on Hardened Victaulic Ends -22D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown 5″ Pipe I.D. – 7mm Thickness

Add to cart
featured_image

5″ Static Line Bends with Welded on Hardened Victaulic Ends -15D

– Korean made long radius bends- Great for setting up static lines – Painted in 2 Pac white colour – “A” Length to be measured as shown 5″ Pipe I.D – 7mm Thickness

Add to cart
featured_image

5″ Twin Wall Boom Elbows with Welded on Hardened Victaulic Ends -90D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown 5″ Pipe I.D. – 11/13mm Thickness

Add to cart
featured_image

5″ Twin Wall Boom Elbows with Welded on Hardened Victaulic Ends -45D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown  

Add to cart
featured_image

5″ Twin Wall Boom Elbows with Welded on Hardened Victaulic Ends -30D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown  

Add to cart
featured_image

5″ Twin Wall Boom Elbows with Welded on Hardened Victaulic Ends -20D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown  

Add to cart
featured_image

5″ Twin Wall Boom Elbows with Welded on Hardened Victaulic Ends -15D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown  

Add to cart
featured_image

5″ Twin Wall Boom Elbows with Welded on Hardened Victaulic Ends -10D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown  

Add to cart
featured_image

5″ High-Manganese Cast Boom Elbows with Victaulic Ends-90D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown 5″ Pipe I.D. – 11/13mm Thickness Fatback Elbow shown in Pic 3 (ELB-5-R275-90D-FB)

Add to cart
featured_image

5″ High-Manganese Cast Boom Elbows with Victaulic Ends-45D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown  

Add to cart
featured_image

5″ x R275 High-Manganese Cast Boom Elbows with Victaulic Ends-30D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown  

Add to cart
featured_image

5″ High-Manganese Cast Boom Elbows with Victaulic Ends-20D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown  

Add to cart
featured_image

5″ High-Manganese Cast Boom Elbows with Victaulic Ends-15D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown  

Add to cart
featured_image

5″ High-Manganese Cast Boom Elbows with Victaulic Ends-10D

– Korean made. – 11mm(Collar)/13mm(Bend) thick elbow for Boom Pumps – Painted in 2 Pac white colour. – “A” length to be measured as shown  

Add to cart
featured_image

4″ Line Pump Elbows with Welded Victaulic Ends – 90D

– Korean made 7mm thick elbows for everyday line pump work – 85BAR working pressure using 1020 carbon steel – Painted in 2 Pac white colour. – “A” Length to be measured as shown 4″ Pipe I.D – 7mm Thickness

Add to cart
featured_image

4″ Line Pump Elbows with Welded Victaulic Ends – 45D

– Korean made 7mm thick elbows for everyday line pump work – 85BAR working pressure using 1020 carbon steel – Painted in 2 Pac white colour. – “A” Length to be measured as shown 4″ Pipe I.D. – 7mm Thickness

Add to cart
featured_image

4″ Line Pump Elbows with Welded Victaulic Ends – 60D

– Korean made 7mm thick elbows for everyday line pump work – 85BAR working pressure using 1020 carbon steel – Painted in 2 Pac white colour. – “A” Length to be measured as shown  

Add to cart
featured_image

4″ Line Pump Elbows with Welded Victaulic Ends – 35D

– Korean made 7mm thick elbows for everyday line pump work – 85BAR working pressure using 1020 carbon steel – Painted in 2 Pac white colour. – “A” Length to be measured as shown  

Add to cart
featured_image

4″ Line Pump Elbows with Welded Victaulic Ends – 22D

– Korean made 7mm thick elbows for everyday line pump work – 85BAR working pressure using 1020 carbon steel – Painted in 2 Pac white colour. – “A” Length to be measured as shown 4″ – 102mm Pipe I.D. – 7mm Thickness

Add to cart
featured_image

4″ Line Pump Elbows with Welded Victaulic Ends – 15D

– Korean made 7mm thick elbows for everyday line pump work – 85BAR working pressure using 1020 carbon steel – Painted in 2 Pac white colour. – “A” Length to be measured as follows 4″ – 102mm Pipe I.D. – 7mm Thickness

Add to cart
featured_image

3″ Line Pump Elbows with Welded Victaulic Ends – 90D

– Korean made 7mm thick elbows for everyday line pump work – 85BAR working pressure using 1020 carbon steel – Painted in 2 Pac white colour. – “A” Length to be measured as follows 3″ – 76mm Pipe I.D. – 7mm Thickness

Add to cart
featured_image

3″ Line Pump Elbows with Welded Victaulic Ends – 45D

– Korean made 7mm thick elbows for everyday line pump work – 85BAR working pressure using 1020 carbon steel – Painted in 2 Pac white colour. – “A” Length to be measured as shown 3″ – 76mm Pipe I.D. – 7mm Thickness

Add to cart
featured_image

5″ Static Line ST52 Pipes with PM Male/Female High-Pressure Ends

– 85BAR working pressure using ASTM1020 carbon steel – Painted in 2 Pac white colour – great for running long static lines in tunnels or other enclosed sites – Custom lengths made to order  

Add to cart
featured_image

5″ Twin wall Concrete Pump Pipes with Welded Victaulic Ends

– 60-65HRC hardening process. Korean made – Carbon insert long lasting victaulic ends – 85BAR working pressure using ASTM1020 carbon steel – Painted in 2 Pac white colour – Boom pipes (4.5mm) and deck pipes (7mm) available – Custom lengths made to order

Add to cart
featured_image

5″ Hardened/Heat Treated Concrete Boom Pump Pipes with Welded Victaulic Ends

– Korean made hardened pipes with 85BAR working pressure using 1020 carbon steel – Painted in 2 Pac white colour. – Heavy duty hardened slip on ends used. – Custom lengths made to order

Add to cart
featured_image

5″ Standard Boom/Static Line ST52 Concrete Pump Pipes with Welded Victaulic Ends

– A heavier grade Korean made seamless pipe used on static lines or concrete booms with a 5” pipeline – 85BAR working pressure using 1020 carbon steel – Painted in 2 Pac white colour. – Heavy duty slip on ends used. – Custom lengths made to order Available in 4.5mm thickness

Add to cart
featured_image

Medium/Hard Sponges

Available in various sizes and packs Different sizes can be made to order. Minimum quantities apply.

Add to cart
featured_image

Soft/Medium Rectangle Sponges

180 x 180 x 180mm For Pipe/Hose I.D. 5″/6″ Pack of 30 pieces Different sizes can be made to order. Minimum quantities apply.

Add to cart
featured_image

Medium/Hard Square White Sponges

Available in 2 sizes in packs of 50

Add to cart
featured_image

Soft Cylinder Yellow Sponges

Great alternative to standard foam sponges can be hidden away in the truck for emergencies Available in 2 sizes in packs of 50

Add to cart
featured_image

Soft Square Yellow Sponges

Vacuum packed sponges Great alternative to standard foam sponges Can be hidden away in the truck for emergencies 2 Sizes available in boxes of 50

Add to cart
featured_image

Bulka Bags – 1 Tonne

90 x 90 x 90cm Safe Working Load: 1000kgs Safety Factor: 5:1 Single use bag with 4 cross corner loops

Add to cart
featured_image

Sponge Ball Catcher

Various sizes available

Add to cart
featured_image

Crete Off Ready to Use Concrete Remover

Crete Off concrete dissolver works by attacking and dissolving the “glue” or Portland in concrete. It deconstructs the bond netween the Portland and the other ingredients such as sand or gravel. It turns the material into a soft mush which does not require hazardous waste disposal. Great replacement product for acid and is not classified […]

Add to cart
featured_image

Super Tech Concentrated Truck Wash

Designed to clean painted surfaces without agitation 1L of concentrated liquid will make 10L of truck wash

Add to cart
featured_image

True Grit Hand Cleaner

Heavy duty hand cleaner for industrial use, designed to remove the toughest industrial soils from hands without stripping natural oils from the skin. It contains natural citrus extracts and fine polyethylene beads to remove grease, oil, grime and most paints and inks For best results, apply to dry hands, massage in and then rinse with […]

Add to cart
featured_image

Concrete Hose Stand – Foldable

Great for getting concrete hoses up and over formwork or when wanting to prevent the hose from being damaged over an edge. Dimensions when folded: 500mm x 500mm x 100mm Great for pumps with little room Lightweight stand with adjustable height function Replacement rollers also available  

Add to cart
featured_image

Concrete Hose Stand – Fixed

Great for getting concrete hoses up and over formwork or when wanting to prevent the hose from being damaged over an edge. Adjustable height from 200mm to 500mm Carbon steel rollers with bearings Replacement rollers also available  

Add to cart
featured_image

Concrete Hose Plate

Great for getting concrete hoses moved across mesh without any clamps getting caught up Made from heavy duty 3mm steel CHP-1 -Can be used on all concrete hoses between 2″ and 5″ CHP-1-S – For concrete hoses 2″, 2.5″ and 3″  

Add to cart
featured_image

Concrete Boom Pump Safety Sticker Set

Replacement pack of safety stickers for your concrete boom pump 53 pieces per set  

Add to cart
featured_image

Concrete Line/Trailer Pump Safety Sticker Set

Replacement pack of safety stickers for your concrete line/trailer pump 19 pcs per set  

Add to cart
featured_image

4.5″ Boom/Static Line Concrete Pump Pipes with Welded Victaulic Ends

Korean made 4″ pipes with metric Schwing 4.5″ welded on victaulic ends 85BAR Working pressure using 1020 carbon steel Painted in 2 Pac white colour Heavy duty slip on ends Please note 7mm pipes are made to order – Please allow 8-10 weeks for delivery Custom Lengths and colours also available. Please call 1300 210 […]

Add to cart
featured_image

4″ Boom/Static Line Concrete Pump Pipes with Welded Victaulic Ends

A heavier grade Korean made seamless pipe used on static lines or concrete booms with a 4″ pipeline 85BAR Working pressure using 1020 carbon steel Painted in 2 Pac white colour Heavy duty slip on ends Please note 7mm pipes are made to order – Please allow 8-10 weeks for delivery Custom Lengths and colours […]

Add to cart
featured_image

Lightweight Concrete Line Pump Delivery Pipes – 4″ I.D.

Korean made 3mm thick seamed pipe great for everyday line pump work 85BAR working pressure using 1020 carbon steel Painted in 2 pac white colour Heavy duty slip on ends Custom lengths and colours also available – Please call 1300 210 910 for more information

Add to cart
featured_image

Lightweight Concrete Line Pump Delivery Pipes – 3″ I.D.

Korean made 3mm thick seamed pipe great for everyday line pump work 85BAR working pressure using 1020 carbon steel Painted in 2 pac white colour Heavy duty slip on ends  

Add to cart
featured_image

Lightweight Concrete Line Pump Delivery Pipes – 2″ I.D.

These pipes are made to order with 8-10 weeks lead time Korean made 3mm thick seamed pipe great for everyday line pump work 85BAR working pressure using 1020 carbon steel Painted in 2 pac white colour Heavy duty slip on ends

Add to cart
featured_image

4″ Concrete Pump Accessory Starter Pack

Includes the following: 5pcs x Victaulic Snap Clamp 6pcs x Rubber Gasket 2pcs x Sponge Ball  

Add to cart
featured_image

3″ Concrete Pump Accessory Starter Pack

Includes the following: 4pcs x Victaulic Snap Clamp 5pcs x Rubber Gasket 2pcs x Sponge Ball Product Code: CPAP-3

Add to cart
featured_image

2″ Concrete Pump Accessory Starter Pack

Includes the following: 3pcs x Victaulic Snap Clamps 5pcs x Rubber Gaskets 2pcs x Sponge Balls

Add to cart
featured_image

Set of 2 Bolt/Nut/Washer

Used with our hose repair half clamp

Add to cart
featured_image

Hose Repair Kit for concrete Delivery Hose

Includes: Hose half clamp with Bolt/Nut Hardened Hose Tail with Victaulic End

Add to cart
featured_image

Extended Length Concrete Hose Ferrule

Extended length steel ferrule for concrete hose tails

Add to cart
featured_image

Standard Length Concrete Hose Ferrule

Steel Ferrule for concrete hose tails

Add to cart
featured_image

Non Reducing Concrete Hose Tail and Ferrule Set

Non-Reducing type Hardened reducing victaulic end x hose tail with Ferrule set

Add to cart
featured_image

Reducing Concrete Hose Tail and Ferrule Set

Reducing type Hardened Reducing Victaulic End x Hose Tail with Ferrule set

Add to cart
featured_image

Extended Length Concrete Hose Fitting

Extended length hose tail x Victaulic end

Add to cart
featured_image

Reducing Concrete Hose Fitting

Hardened Hose Tail x Victaulic end

Add to cart
featured_image

Non-Reducing Concrete Hose Fitting

Hardened Hose Tail x Victaulic End

Add to cart
featured_image

Standard Concrete Hose Fitting

Hardened Hose tail x Victualic end

Add to cart
featured_image

250psi Yellow Continental Air/Water Hose Assembly

Made in USA Comes with Crimped on Type A Fittings – Available in 19mm and 25mm I.D Custom Lengths available on request

Add to cart
featured_image

2″ O Ring and Washer Set

Replacement parts for a 2″ shotcrete spray gun. Set includes 2 x rubber O rings and 1 x steel washer  

Add to cart
featured_image

Galvanised Stocking with Thimble on Each Eye for Concrete Hoses

Product Codes:

CAB-100130-TH 2″ Hose ID 100-130mm Size Range
CAB-130180-TH 4/5″ Hose ID 130-180mm Size Range
CAB-180210-TH 5″ Hose ID 180-210mm Size Range

CUSTOM SIZES AVAILABLE ON REQUEST

Add to cart
featured_image

2″/3″/4″/5″ Galvanised Steel Safety Whip Check for Concrete Hoses

Available in 2 sizes: 6mm ID – 2T Load Rating – 120cm length 10mm ID- 5T Load Rating – 105cm length

Add to cart
featured_image

Continental Flexsteel 250 Steam Hose

Product Information APPLICATION: For cleaning, heat control, fire prevention, pumping, thawing, blow-out service, steam pumps and hoists in open-end or permanent installation operations. It is used in refineries, shipyards, chemical plants, steel mills, foundries and heavy industrial applications where high strength is required and where sever environmental conditions are encountered. CONSTRUCTION TUBE: PyrosynR synthetic rubber […]

Add to cart
featured_image

Continental Food Processing Washdown Hose

Product Information APPLICATION: A high quality economical construction for hot water up to 200F (93C) clean up service in food processing plants, dairies, packing houses, bottling plants, breweries and creameries. CONSTRUCTION TUBE: Black Nitrile synthetic rubber, RMA Class A (High oil resistance), non FDA COVER: WhiteChemivic synthetic rubber, RMA Class A (High oil resistance) REINFORCEMENT: […]

Add to cart
featured_image

Continental Plicord Extremeflex Petroleum Transfer Hose – Made in USA

Product Information APPLICATION: An extremely flexible and lightweight drop hose for use in tank truck and in-plant operation to transfer diesel, ethanol, gasoline, oil and petroleum base products up to 60% aromatic content. Corrugated construction for lower drag coefficient and superior abrasion resistance. CONSTRUCTION TUBE: Black Nitrile synthetic rubber (Class A oil resistance) COVER: Black […]

Add to cart
featured_image

Continental Oil Suction & Discharge Hose

Product Information APPLICATION: General purpose hose used to transfer gasoline, oil and other petroleum based products. Hose is designed for pressure, gravity flow or suction service CONSTRUCTION TUBE: NBR (Oil resistant) COVER: Black NBR (Oil resistant); wrapped finish REINFORCEMENT: Synthetic fabric plies (2) with wire helix TEMPERATURE: -20˚C to 70˚C

Add to cart
featured_image

Continental Petrol & Oil Delivery Hose

Product Information APPLICATION: General purpose hose for use in the discharge of gasoline, oil and other petroleum based products. CONSTRUCTION TUBE: NBR (Oil resistant) COVER: Black NBR (Oil resistant); wrapped finish REINFORCEMENT: Synthetic fabric plies (2) TEMPERATURE: -20˚C to 70˚C

Add to cart
featured_image

Continental Premium Clear Vinyl Tubing Hose

Product Information APPLICATION: General purpose low pressure tubing suitable for use with air, water, food, beverage, fuel and oil applications. Conforms to AS2070 (non toxic food grade) CONSTRUCTION TUBE: Clear Blue Tint Virgin PVC TEMPERATURE: -10˚C to 60˚C

Add to cart
featured_image

Continental Safety Yellow Hose with Ribbed Finish

Product Information APPLICATION: A versatile heavy duty PVC hose suitable for use in compressed air and water applications. EPFLOW Safety Yellow has excellent UV resistance to withstand the extreme Australian condition and the highly visible yellow ribbed cover provides superior abrasion resistance. Conforms to AS2554-Class B CONSTRUCTION TUBE: Black PVC COVER: Yellow PVC, Ribbed finish, […]

Add to cart
featured_image

Continental Fuel Line/Emission Control Hose – Made in USA

Product Information APPLICATION: : Multipurpose hose for use on fuel line, PCV and EEC systems. The HysuniteR hose cover is oil and petrol resistant and withstands exposure to fuel, vapour, moisture and high heat up to 125°C.The rubber tube is specially compounded to resist diesel, oil and unleaded petrol and blends of ethanol, methanol and […]

Add to cart
featured_image

Continental Blue Oil Suction Hose

Product Information APPLICATION: Highly flexible blue Nitrile hose used in tank truck and in-plant operations to transfer some fuel,oil and other petroleum based products. Hose is designed for pressure, gravity flow or full suction service, which makes it a great choice for the collection of waste products and chemicals found in grease trap and septic […]

Add to cart
featured_image

Continental Food Processing Washdown Hose

Product Information APPLICATION: A high-quality, economical construction for hot water up to 200˚F (93˚C) clean up service in food processing plants, dairies, packing houses, bottling plants, breweries, canneries and creameries CONSTRUCTION TUBE: Black Nitrile synthetic rubber, RMA Class A (High Oil Resistance), non-FDA COVER: White Chemivic™ synthetic rubber, RMA Class A (High Oil Resistance) REINFORCEMENT: […]

Add to cart
featured_image

Continental Blue Pliovic Premium Air Toil Hose with Nitto Fittings (Made in USA)

Product Information APPLICATION: A lightweight, economical general purpose hose for carrying air, water and many spray solutions. PliovicR is suitable for a wide range of industrial, construction, agricultural hand sprayers and many multipurpose applications. Non-conductive, minimum electrical resistance greater than one (1) megohm per inch of hose length at 1000 Volts DC. Available in PliovicR […]

Add to cart
featured_image

Continental Clear Multipurpose Transfer Hose

Product Information APPLICATION: A versatile lightweight multipurpose hose suitable for food and beverage, general industrial and agricultural applications. EPFLOW Clear Multipurpose hose is also suitable to transfer fuel and oil based products. Conforms to AS2070 (non toxic food grade) and AS2554 CONSTRUCTION TUBE: Clear PVC COVER: Clear PVC, Blue tint, UV stabilised REINFORCEMENT: Polyester with […]

Add to cart
featured_image

Continental Red Air Multipurpose Hose (Made in USA)

Product Information APPLICATION: A good-quality, economical general purpose hose for industrial air service, compressor lines, pneumatic tools, low-pressure spray and many other applications where the need for oil resistance is moderate. Non-conductive, minimum electrical resistance greater than one (1) megohm per inch of length of hose at 1000 V DC. CONSTRUCTION TUBE: Nitrile synthetic rubber, […]

Add to cart
featured_image

Continental Plicord Torridair Hot Air Blower

Product Information APPLICATION: Designed to transfer hot, non-oily air (up to 400˚F) from manifold blowers or in-plant compressors to holding tanks used in the transfer of dry bulk materials. CONSTRUCTION TUBE: Black, STF (Super Thermo-Flo) VersigardR synthetic rubber COVER: Black, weather-resistant, STF (Super Thermo-Flo) VersigardR synthetic rubber (wrapped impression) REINFORCEMENT: Spiral-plied synthetic fabric with double […]

Add to cart
featured_image

Continental Black Softwall Hose

Product Information APPLICATION: For the discharge of dry bulk cement from tank truck and in-plant service. CONSTRUCTION TUBE: 1/8” (static dissipating/static conductive) Black TufsynR synthetic rubber. Available in 1/8”,3/16”, and 1/4” tube gauges COVER: Black PlioflexR synthetic rubber with white spiral stripe (wrapped impression) REINFORCEMENT: Spiral-plied synthetic fabric TEMPERATURE: -32˚C to 82˚C Used with Type […]

Add to cart
featured_image

Continental Muff Coupling Hose

Product Information APPLICATION: An abrasive slurry hose to be used in conjunction with split muff couplings (also available).The hose has the high strength needed to handle pressure or suction service in the transfer of dry bulk, slurry, salt, cement, fertilisers and a limited number of oil based products. CONSTRUCTION TUBE: SBR / NBR Blended COVER: […]

Add to cart
featured_image

Continental Material Handling Vacuum Hose

Product Information APPLICATION: The ArtracR hose is used for a variety of abrasive, material-handling applications to transfer sand, gravel, cement, fly ash, glass, metals, plastic pellets, fertilizers, rock salts and slurries. CONSTRUCTION TUBE: Thermoplastic alloyed blend of polyurethane and PVC (static dissipating/static conductive) COVER: Thermoplastic alloyed blend of nitrile, polyurethane, and PVC (nonconductive) REINFORCEMENT: Rigid […]

Add to cart
featured_image

Grey Water Suction Hose

Product Information APPLICATION: EPFLEX Grey Water Suction Hose is a general purpose suction hose used in industrial, agricultural and Construction applications. Its high grade properties make it suitable to convey water, mud, light slurries, grain, sand and some chemicals. CONSTRUCTION TUBE: Grey PVC REINFORCEMENT: Rigid PVC helix TEMPERATURE: -5˚C to 60˚C

Add to cart
featured_image

Continental High Pressure Washer Hose (Made in USA) with Male/Female fittings

Product Information APPLICATION: For use on pressure washer machines with working pressures up to 4500 psi. CONSTRUCTION TUBE: Nitrile synthetic rubber COVER: Black or Blue oil-resistant synthetic rubber, RMA Class B (Medium Oil Resistance) REINFORCEMENT: Braided (2) steel wires TEMPERATURE: -20°F to 250°F (-29°C to 121°C)

Add to cart
featured_image

20BAR/300psi Grout Hose Assembly

Product Information APPLICATION: General purpose hose for use in heavy duty service for a wide range of applications. CONSTRUCTION TUBE: NR / SBR Blended COVER: Black SBR / EPDM Blended; wrapped finish REINFORCEMENT: Synthetic fabric plies (2) TEMPERATURE: -20˚C to 70˚C

Add to cart
featured_image

10BAR Water Discharge Hose Assembly

Product Information APPLICATION: General purpose hose for use in heavy duty service for a wide range of applications CONSTRUCTION TUBE: NR / SBR Blended COVER: Black SBR / EPDM Blended; wrapped finish REINFORCEMENT: Synthetic fabric plies (2) TEMPERATURE: -20˚C to 70˚C

Add to cart
featured_image

Continental Water Discharge Hose only

Product Information APPLICATION: For use as a general purpose suction and discharge hose in medium to heavy-duty operations. CONSTRUCTION TUBE: Black PlioflexR synthetic rubber COVER: Black PlioflexR synthetic rubber (wrapped finish) REINFORCEMENT: Synthetic fabric plies with internal wire helix TEMPERATURE: -32˚C to 82˚C

Add to cart
featured_image

Clear PVC Water Suction Hose with Wire Braid – Hose only

Product Information APPLICATION: A versatile clear suction hose used in the conveyance of a wide range of food and beverage materials. The non-toxic formulation conforms with FDA requirements. CONSTRUCTION TUBE: Clear PVC COVER: Clear PVC REINFORCEMENT: Spring Wire TEMPERATURE: -7°C to 66°C

Add to cart
featured_image

Rubber Water Suction and Delivery Hose (10BAR/150psi)

Product Information APPLICATION: General purpose suction and discharge hose for use in medium to heavy duty operations. CONSTRUCTION TUBE: NR / SBR Blended COVER: Black SBR / EPDM Blended; wrapped finish REINFORCEMENT: Synthetic fabric plies (2) with wire helix TEMPERATURE: -20°C to 70°C

Add to cart
featured_image

Water Pump and Drive Unit

Pump is a very popular heavy duty 50mm (2”) industrial pump with large 15mm core dry cable which provides wider access and easier flow. It is made with cast iron casing with wide passages to allow debris (up to 25mm) to pass through and can allow fluids containing up to 60% solids. The main shaft […]

Add to cart
featured_image

Red Medium Duty Layflat Hose Assemblies with Fabric Outer Layer and Bauer Fittings

Product Information APPLICATION: For medium-duty discharge applications in mining, construction, industry, agriculture and marine service. Limited oil and chemical application. Also recommended for sprinkler pivot and water transport. CONSTRUCTION TUBE: Red PVC compound COVER: Red PVC compound REINFORCEMENT: Spiral synthetic yarn, one layer longitudinal synthetic yarn TEMPERATURE: -23°C to 77°C

Add to cart
featured_image

Red Medium Duty Layflat Hose Assemblies with Fabric Outer Layer and Camlock Ends

Product Information APPLICATION: For medium-duty discharge applications in mining, construction, industry, agriculture and marine service. Limited oil and chemical application. Also recommended for sprinkler pivot and water transport. CONSTRUCTION TUBE: Red PVC compound. COVER: Red PVC compound. REINFORCEMENT: Spiral synthetic yarn, one layer longitudinal synthetic yarn TEMPERATURE: -23°C to 77°C

Add to cart
featured_image

Red Medium Duty Layflat Hoses with Fabric Outer Layer – Hose only

Please note the 1 ½” and 2” hoses are available in 100m lengths with 8-10 weeks lead time Product Information APPLICATION: For medium-duty discharge applications in mining, construction, industry, agriculture and marine service. Limited oil and chemical application. Also recommended for sprinkler pivot and water transport. CONSTRUCTION TUBE: Red PVC compound. COVER: Red PVC compound. […]

Add to cart
featured_image

Blue Light Duty Layflat Hose

Product Information APPLICATION: For light-duty water discharge applications in mining, construction, industry, agricultural and marine service. CONSTRUCTION TUBE: Blue PVC compound. COVER: Blue PVC compound. REINFORCEMENT: Synthetic fabric TEMPERATURE: -23°C to 77°C

Add to cart
featured_image

Continental Air/Water Hose – No Fittings

Product Information APPLICATION: An economical air and water hose. For a wide range of industrial, construction and agricultural applications. CONSTRUCTION TUBE: Versigard® synthetic rubber, RMA Class C (Limited Oil Resistance) COVER: Yellow Versigard® synthetic rubber REINFORCEMENT: Spiral synthetic yarn, 2” is braided TEMPERATURE: -40°C to 88°C

Add to cart
featured_image

6m Extension Drive Shaft

A 6m Extension Shaft to suit all 3 dog Drive Flex Drive pumps or Vibrator Shafts, 15mm inner core cable, 60kg.

Add to cart
featured_image

6.0hp Crommelins Petrol Drive Unit

This 6.0hp Drive Unit will drive 2″ (50mm) Submersible Flexible Drive Pumps such as Crommelins FP2T model and Concrete Vibrators (See Crommelins JV range). It comes complete with a heavy-duty roll frame to protect it from damage and is backed by Crommelins award winning spare parts and service. (Upgraded from 5.0hp to 6.0hp) Features – […]

Add to cart
featured_image

250psi Yellow Continental Air/Water Hose Assembly

Made in USA Comes with Crimped on Type A Fittings – Available in 19mm and 25mm I.D Custom Lengths available on request

Add to cart
featured_image

Stainless Steel Pressure Gauge – BSPT

Liquid filled 65mm dial face Stainless steel pressure gauge 1/4 BSPT Connection

Add to cart
featured_image

Double Bolt Clamp

Heavy duty steel double bolt clamp for high pressure applications Other sizes available on request

Add to cart
featured_image

4 Bolt Claw Clamp

Heavy duty steel 4 bolt claw clamp for high pressure applications

Add to cart
featured_image

Stainless Steel Worm Drive Hose Clamp

Shipped in a pack of 10 Please contact us if size required is not shown

Add to cart
featured_image

Heavy Duty Galvanised Steel Super Clamp

Available in stainless Steel upon request. Please Contact us if size required is not shown

Add to cart
featured_image

Galvanised Threaded Pipe BSPT

See table below for sizes available

Add to cart
featured_image

Galvanised Threaded Pipe BSPP

Please see table below for size details

Add to cart
featured_image

2 Bolt Claw Clamp

Heavy duty steel 2 bolt claw clamp for high pressure applications

Add to cart
featured_image

Stainless Steel Pressure Gauge – BSPP

Liquid filled 65mm dial face Stainless steel pressure gauge 1/4 BSPP Connection

Add to cart
featured_image

Camlock Rubber Seals

Available in Packs of 5 pieces

Add to cart
featured_image

Type DC Stainless Steel Camlock

Female Camlock Adaptor x End Cap

Add to cart
featured_image

Type F Stainless Steel Camlock

Male Camlock Adaptor x Male BSP Thread

Add to cart
featured_image

Type E Stainless Steel Camlock

Male Camlock Adaptor x Hose tail Hose Tail can be secured inside the hose using our T-Bolt Superclamps (See Page 15)

Add to cart
featured_image

Type D Stainless Steel Camlock

Female Camlock x Female BSP Thread

Add to cart
featured_image

Type C Stainless Steel Camlock

Female Camlock Adaptor x Hose Tail Hose tail can be secured inside the hose using our T Bolt Superclamps (See Page 15)

Add to cart
featured_image

Type B Stainless Steel Camlock

Female Camlock Adaptor x Male BSP Thread

Add to cart
featured_image

Type A Stainless Steel Camlock

Male Camlock Adaptor x Female BSP Thread

Add to cart
featured_image

Type DP Aluminium Camlock

Male Camlock Adaptor x End Cap

Add to cart
featured_image

Type DC Aluminium camlock

Female Camlock Adaptor x End Cap

Add to cart
featured_image

Type F Aluminium Camlock

Male Camlock Adaptor x Male BSP Thread

Add to cart
featured_image

Type E Aluminium Camlock

Male Camlock Adaptor x Hose Tail Hose Tail can be secured inside the hose using our hose clamps (See Page 15)

Add to cart
featured_image

Type D Aluminium Camlock

Product Codes:

1″ CAM-D-1
1.5″ CAM-D-15
2″ CAM-D-2
3″ CAM-D-3
4″ CAM-D-4

Add to cart
featured_image

Type C Aluminium Camlock

Female Camlock Adaptor x Hose Tail Hose tail can be secured inside the hose using our hose clamps (See Page 15)

Add to cart
featured_image

Type B Aluminium Camlock

Female Camlock Adaptor x Male BSP Thread

Add to cart
featured_image

Type A Aluminium Camlock

Male Camlock Adaptor x Female BSP Thread

Add to cart
featured_image

Bauer Fitting Rubber Seal

Product Codes:

4″ BA-4-SEAL
6″ BA-6-SEAL

Add to cart
featured_image

Male Bauer x Male BSP Thread

Product Codes:

4″ BA-MB-4
6″ BA-MB-6

Add to cart
featured_image

Female Bauer x Male BSP Thread

Product Codes:

4″ BA-FB-4
6″ BA-FB-6

Add to cart
featured_image

Male Bauer x Weld on Flange

Product Codes:

4″ BA-MF-4
6″ BA-MF-6

Add to cart
featured_image

Female Bauer x Weld on Flange

Product Codes:

4″ BA-FF-4
6″ BA-FF-6

Add to cart
featured_image

Male Bauer Lever

Product Codes:

3″ BA-ML-3
4″ BA-ML-4
6″ BA-ML-6

Add to cart
featured_image

Male Bauer to Tail

Product Codes:

3″ BA-MT-3
4″ BA-MT-4
6″ BA-MT-6

Add to cart
featured_image

Female Bauer to Tail

Product Codes:

3″ BA-FT-3
4″ BA-FT-4
6″ BA-FT-6

Add to cart
featured_image

Wafer Butterfly Valve

Product Codes:

51mm BUTV-51
63mm BUTV-63
76mm BUTV-76
102mm BUTV-102
152mm BUTV-152

Add to cart
featured_image

Gate Valve with Female/Female BSP Thread

Product Codes:

25mm GVFF-25
38mm GVFF-38
51mm GVFF-51
76mm GVFF-76
102mm GVFF-102

Add to cart
featured_image

L Port Ball Valve with Female/Female BSP Thread

Product Codes:

12mm BVLP-FF-12
19mm BVLP-FF-19
25mm BVLP-FF-25
38mm BVLP-FF-38
51mm BVLP-FF-51

Add to cart
featured_image

T Port Ball Valve with Female/Female BSP Thread

12mm BVTP-FF-12
19mm BVTP-FF-19
25mm BVTP-FF-25
38mm BVTP-FF-38
51mm BVTP-FF-51

Add to cart
featured_image

Stainless Steel Ball Valve with Female/Female BSP Thread

Product Codes:

19mm BVFF-19-S
25mm BVFF-25-S
38mm BVFF-38-S
51mm BVFF-51-S

Add to cart
featured_image

Three Piece Full Port 316 Stainless Steel Ball Valve

Product Codes:

19mm BV3PC-FF-19
25mm BV3PC-FF-25
38mm BV3PC-FF-38
51mm BV3PC-FF-51

Add to cart
featured_image

Brass Ball Valve with Female/Female BSP Thread

Product Codes:

6mm BVFF-6
12mm BVFF-12
19mm BVFF-19
25mm BVFF-25
38mm BVFF-38
51mm BVFF-51
76mm BVFF-76
102mm BVFF-102

Add to cart
featured_image

Brass Ball Valve with Male/Female BSP Thread

12mm BVMF-12
19mm BVMF-19
25mm BVMF-25
38mm BVMF-38
51mm BVMF-51
76mm BVMF-76
102mm BVMF-102

Add to cart
featured_image

Type A Claw Locking Pin – Triangle

Product Codes:

20pcs AWF-PIN-T-20
100pcs AWF-PIN-T-100
200pcs AWF-PIN-T-200

Add to cart
featured_image

Type A Fitting Rubber Seal

Product Codes:

12mm AWF-12-SEAL
19mm AWF-19-SEAL
25mm AWF-25-SEAL

Add to cart
featured_image

Type A Claw Locking Pin – R Type

Product Codes:

20pcs – AWF-PIN-R-20
100pcs AWF-PIN-R-100
200pcs AWF-PIN-R-200

Add to cart
featured_image

Type A – Air/Water Hose Repair Kit

12mm AWF-HRK-12
19mm AWF-HRK-19
25mm AWF-HRK-25

Add to cart
featured_image

Type A Bolt Clamp for LAH Fitting

12mm AWF-12-BOLT
19mm AWF-19-BOLT
25mm AWF-25-BOLT

Add to cart
featured_image

Type A Coupler x Male BSP Thread – Type LAM

12mm AWF-12-LAM
19mm AWF-19-LAM
25mm AWF-25-LAM

Add to cart
featured_image

Type A Coupler x Hosetail – Type LAF

12mm AWF-12-LAF
19mm AWF-19-LAF
25mm AWF-25-LAF

Add to cart
featured_image

Type A Coupler x Hosetail – Type LAH

PRODUCT CODES:

12mm AWF-12-LAH
19mm AWF-19-LAH
25mm AWF-25-LAH

Add to cart

Sorry, there are no products On Sale right now

featured_image

Lifting Lugs – 5 T – Weldable

Weld On lifting lugs Capacity: 5 Tonne Can be welded on any carbon steel surface as a lifting point or to be used as a fixed anchor point for spreader beam attachment or load restraint applications Available in 2 Pack

Add to cart
featured_image

Lifting Lugs – 3 T – Weldable

Weld On lifting lugs Capacity: 3 Tonne Can be welded on any carbon steel surface as a lifting point or to be used as a fixed anchor point for spreader beam attachment or load restraint applications Available in 2 Pack

Add to cart
featured_image

Lifting Lugs – 1 T – Weldable

Weld On lifting lugs Capacity: 1 Tonne Can be welded on any carbon steel surface as a lifting point or to be used as a fixed anchor point for spreader beam attachment or load restraint applications Available in 2 Pack

Add to cart
featured_image

Python Hopper Sleeve Safety Cover – Line Pump

Python Back Hopper Sleeve Safety Cover for Concrete Line Pumps Click on video link below to see this in operation

Add to cart
featured_image

Lifting Lugs – 2 T – Weldable

Weld On lifting lugs Capacity: 2 Tonne Can be welded on any carbon steel surface as a lifting point or to be used as a fixed anchor point for spreader beam attachment or load restraint applications Available in 2 Pack, 4 Pack and 10 Pack

Add to cart
featured_image

Gumboots – Steel Cap – Blundstone

Blundstone Yellow Tag Gumboots with Steel Cap Available in Sizes 9-13

Add to cart
featured_image

Python Concrete Hose Safety Cover

Python Hose Sleeve – Safety Cover for Concrete hose

Add to cart
featured_image

Python Hopper Sleeve Safety Cover – Boom Pump

Python Back Hopper Sleeve Safety Cover for Concrete Boom Pumps

Add to cart
featured_image

Wire Rope Bulldog Grip

Wire Rope Bulldog Grip Available in sizes from 8mm to 40mm

Add to cart
featured_image

Concrete Pump Safety Sign

Measures 21cm x 60cm x 30cm

Add to cart
featured_image

Soft Leather Rigger Gloves

Good quality full-grain unlined cowhide glove
Field of application: All-round work glove for environments and situations where leather gloves are required

Available in Large and Extra-Large

12 pairs per pack
144 pairs per box

 

Add to cart
featured_image

Black Nitrile Gloves

Seamless knitted black nylon liner with knitted, elasticated cuffs.
Nitrile coating to palms and fingertips, provides excellent dexterity with precise grip
Added surface to provide extra grip during application

Available in Large GLV-N-L and Extra Large GLV-N-XL

Available in packs of 12 pairs or box of 144 pairs

Add to cart
featured_image

Concrete Boom Pump Safety Sticker Set

Replacement pack of safety stickers for your concrete boom pump 53 pieces per set  

Add to cart
featured_image

Concrete Line/Trailer Pump Safety Sticker Set

Replacement pack of safety stickers for your concrete line/trailer pump 19 pcs per set  

Add to cart
featured_image

D Shackle Screw Pin

Available in sizes ranging from 0.5T 6-8mm through to 4.7T 19-22mm

Please refer to catalogue for sizes and product codes

More sizes are available on request

Add to cart
featured_image

Bow Shackle Screw Pin

Available in sizes ranging from 0.5T 6-8mm through to 4.7T 19-22mm

Additional sizes available on request

Add to cart
featured_image

Retractable Safety Knife

Product Code: SA-RK-1

Hard wearing metal body offering self-retracting mechanism for extra safe handling.
Includes one blade

Add to cart
featured_image

Foam Earplugs -Corded

Features and Benefits: Box of 100 – Disposable PU Smooth foam earplugs Class 5 rating (SCL80=27) Highest Class rating under AS/NZS 1270:2002 Noise Reduction Rating: 32 decibels (when used as directed) Individually packaged Single use wear hygiene Low cost, ease of use and high level of comfort Typical Applications are: Construction & Demolition, Noisy workplaces, […]

Add to cart
featured_image

Lifting Slings – Flat

Available in sizes ranging from 1 Ton, 0.5M length to 4 Ton, 5M length

Other sizes and lengths are available upon request

Please refer to catalogue for Product Codes

Add to cart
featured_image

Lifting Slings – Round

Available in Sizes from 1 Ton – 0.5m to 4 Ton – 5m

Other sizes and lengths are available upon request

Add to cart
featured_image

Galvanised Stocking with Thimble on Each Eye for Concrete Hoses

Product Codes:

CAB-100130-TH 2″ Hose ID 100-130mm Size Range
CAB-130180-TH 4/5″ Hose ID 130-180mm Size Range
CAB-180210-TH 5″ Hose ID 180-210mm Size Range

CUSTOM SIZES AVAILABLE ON REQUEST

Add to cart
featured_image

2″/3″/4″/5″ Galvanised Steel Safety Whip Check for Concrete Hoses

Available in 2 sizes: 6mm ID – 2T Load Rating – 120cm length 10mm ID- 5T Load Rating – 105cm length

Add to cart
featured_image

Bolle Rush + Black Safety Glasses

Built in brow protection coating
Co-injected, ultra flex temples, Non-slip bridge

Tested and Approved to AS/NZS 1337.1.2010 for meium impact protection. Resists a 6mm at 4 m/s
100% UV 400 – Smoke

Product Code: SA-SUN-BL-BLE

Add to cart
featured_image

Bolle Rush + Clear Safety Glasses

Built in brow protection coating
Co-injected, ultra-flex temples
Non slip bridge

Tested and Approved to AS/NZS 13371.1.2010 for medium impact protection. Resists a 6mm at 45m/s
100% UV 385 – Clear

Product Code: SA-SUN-CL-BLE

Add to cart
featured_image

Black Budget Safety Glasses

One piece clear polycarbonate lens with anti-mist treatment
Lightweight black nylon frame with built-in brow guard.
Built-in side protection
Low energy impact protection with 400nm UV protection.
Also available with clear lens

Product Code: SA-SUN-BL

Add to cart
featured_image

Clear Budget Safety Glasses

Medium impact protection; AS/NZS 1337.1:2010 BMP 557823, 99.9% UV Protection
Outstanding optical quality; Impact resistant lens
Anti fog coating for humid conditions. Light wrap around design
Also available in Smoke colour

ProDuct Code:SA-SUN-CL

Add to cart
featured_image

Zembrone Orange Reo Safety Bar Cap/Sock 24-36mm

Zembrone spacers are AS/NSZ 2425-2015 compliant please call for our test report

Add to cart
featured_image

Gumboots – Steel Cap – Blundstone

Blundstone Yellow Tag Gumboots with Steel Cap Available in Sizes 9-13

Add to cart
featured_image

250psi Yellow Continental Air/Water Hose Assembly

Made in USA Comes with Crimped on Type A Fittings – Available in 19mm and 25mm I.D Custom Lengths available on request

Add to cart
featured_image

2″ O Ring and Washer Set

Replacement parts for a 2″ shotcrete spray gun. Set includes 2 x rubber O rings and 1 x steel washer  

Add to cart
featured_image

19mm Galvanised F/F Elbow

Replacement part for a 2″ shotcrete spray gun  

Add to cart
featured_image

2″ Female BSP Screw Ring

Replacement part for a 2″ shotcrete spray gun  

Add to cart
featured_image

Worm Drive Clamps 64-76mm

Replacement part for a 2″ shotcrete spray gun. Used to secure shotcrete nozzle tips  

Add to cart
featured_image

19mm Galvansed Elbow and Welded Ring – Twin Fitting

Replacement part for a 2″ Shotcrete spray gun – two fittings  

Add to cart
featured_image

19mm Galvansed Elbow and Welded Ring

Replacement part for a 2″ shotcrete spray gun   Also available with twin fittings

Add to cart
featured_image

Extended Shotcrete Nozzle Tip – Hard – Green

2″ x 450mm Green hard poly extended shotcrete nozzle tip  

Add to cart
featured_image

Extended Shotcrete Nozzle Tip – Medium – Blue

Blue 2″ x 200mm extended length medium hardness rubber shotcrete nozzle  

Add to cart
featured_image

Shotcrete Nozzle Tip – Soft – Black

Black 2″ x 100mm soft natural rubber shotcrete nozzle tip  

Add to cart
featured_image

Shotcrete Nozzle Tip – Medium – Blue

Blue 2″ x 100mm medium hardness rubber shotcrete nozzle  

Add to cart
featured_image

Shotcrete Nozzle Tip – Hard – Green

Green 2″ x 100mm hard poly shotcrete nozzle tip  

Add to cart
featured_image

2″ Shotcrete Extended Hose Tail and Ferrule Set

2″ shotcrete extended 120mm hose tail and ferrule set with female BSP thread  

Add to cart
featured_image

2″ Shotcrete Hose Tail and Ferrule Set

2″ Shotcrete hose tail and ferrule set with female BSP thread. PCS can fit these onto any 2″ concrete hose.  

Add to cart
featured_image

Shotcrete Hose Tail x Female BSP Thread

Used to convert a 2″ single end hose into a shotcrete spray hose  

Add to cart
featured_image

2″ Shotcrete Victaulic End x Female BSP Hose Connector

Used when a standard 2″ concrete hose needs to be converted into a shotcrete spray hose  

Add to cart
featured_image

2″ Shotcrete Victaulic End x Male BSP Hose Connector

Used when a shotcrete spray gun hose needs to be converted into a standard 2″ concrete hose  

Add to cart
featured_image

2″ Hardened Shotcrete Barrel

Replacement part for shotcrete spray gun. 4.6mm hole for improved air flow  

Add to cart
featured_image

2″ Twin Fitting Shotcrete Spray Gun Assembly

Ready to use set comes with 19mm fittings, stainless steel ball valve and rubber spray nozzle. Used when chemical applications are needed to be added to the mix  

Add to cart
featured_image

2″ Shotcrete Spray Gun Assembly

Ready to use assembly comes with 19mm fittings, hardened barrel stainless steel ball valve and rubber spray nozzle.

Add to cart
featured_image

2″ PCS Lightweight Wire Braided Shotcrete Hose

Made in Turkey Crimped fittings include one victaulic end and one BSP female end High pressure hose with 85BAR W.P. Available in 10 metre, 15 metre and 20 metre lengths Custom lengths available upon request. Standard double ended feeder concrete hoses from 2″ up to 5″ also available

Add to cart
featured_image

2″ Continental ‘Made in Germany’ Allcrete Wire Braided Shotcrete Hose

Crimped fittings include one victaulic end and one BSP female end. High pressure hose with 85BAR W.P. Custom lengths available upon request Standard double ended feeder concrete hoses from 2″ up to 5″ also available

Add to cart
featured_image

2″ Continental ‘Made in Canada’ Allcrete Fabric Shotcrete Hose

Crimped fittings include one victaulic end and one BSP Female end High pressure hose With 85BAR W.P. Custom Lengths available on request Standard double ended feeder concrete hoses from 2″ up to 5″ also available

Add to cart